My car currently has no horn on the front. I know its supposed to have the two horn things on the front behind the bumper and I am wondering where can I get these from? Will any horn work? What does the horn plug into is there a spot on the harness for it?

I searched already and found nothing.

 

https://www.rx7club.com/photo/showph...sort=1&cat=508

What I am talking about is just to the right of the intercooler in this photo.

 

That looks to be your horn. My car (94 PEP) only had one horn, and it was on the same side. You can replace it with anything you want, as long as it fits. I bought a "Magnum Blaster" 108db horn from Kragens for under $20. It works very well, and sounds like a horn form a nice car. Just use the existing wires, and you are set.

 

Thanks but Im still not quite sure what wires go to it. there isnt a unit already connected and i dont see the wires hanging anywhere. I did however find two seperate harness plugs in there one is orange inside and the other is yellow. is either one of those for the horn?

 

It's been a while since I installed my horn, so I dont remember the colors. The circular object next to the intercooler appears to be your horn. There should be two wires going to it. Use those wires. If they are no longer there, you may need a wiring diagram to find the correct ones.

 

anybody know the wires that run to this?
got a link to a wiring diagram??

 

www.iluvmy7.com

 

page doesnt work

I had a local friend help me out and I bought a horn ran the wires and now it works great.

 

you guys sure that's the horn to the right of the intercooler? sorta looks like your airbag sensor...plus all SRS wiring are yellow...so if you have airbags, i'd check first, could tear up your steering wheel and/or dash.

 

I have horns for sale if you need a stock one