Hold Light Flashing on Petit ECU
#1
Full Member
Thread Starter
iTrader: (3)
Join Date: Jul 2013
Location: Huntsville, Al
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Hold Light Flashing on Petit ECU
I got a Petit ECU and when I start the car the hold light flashes but it does not flash with my stock ECU. I read some posts that this is a mazda bulliten to replace ECU and also doing the KOKO procedure but the KOKO does not solve the issue. Car runs fine but could the Petit ECU be trash?
#3
Full Member
Thread Starter
iTrader: (3)
Join Date: Jul 2013
Location: Huntsville, Al
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Your exactly right. Well it don't matter now. I broke one of the Hold wires in the stick while taking it out. Now no more Hold for a while. I don't see how the hell you take out the stick....
#4
The manual trans ECU will not allow the trans to shift properly, it does not have the outputs to control the automatic trans.
We developed a harness to allow installation of any manual trans ECU into the automatic, including the chipped ones (Pettit, M2, etc) Banzai Automatic ECU Adapter (93-95 RX-7)
We developed a harness to allow installation of any manual trans ECU into the automatic, including the chipped ones (Pettit, M2, etc) Banzai Automatic ECU Adapter (93-95 RX-7)
Trending Topics
#11
I know for a fact that it does not function correctly, that is why I developed the harness in the first place. What I am not going to do is argue with someone that clearly does not have a clue how the auto trans functions and can't comprehend why there is a difference between manual and auto ECUs.
Good luck with your v8 swap.
Good luck with your v8 swap.
Thread
Thread Starter
Forum
Replies
Last Post
David Hayes
3rd Generation Specific (1993-2002)
13
09-05-22 12:45 PM