many of u may have know by now i'm going to do a 5spd conversion and add a single turbo but i'm still waitin for some of the part to come in but in the mean time I turn on the car once in a while so it doesnt just sit in the driveway but the past 2 times ive started it, it revs at 1500 (doesnt rev down) then the engine just shakes violently. may it already be time for a rebuild, please share your knowledge?

 

also white smoke from the exhaust, and it only happens in park.

 

bump

 

another bump

 

What is on the car currently? Is is all or pretty stock "as is" when you are starting it?

 

the only thing on it is that ive put on a 3" full cat-back exhuast and a pettit intake other than that stock

 

Did it start doing this after those were installed or did it just start out of the blue?

I would first check and see if you have all your connectors seated properly (i.e. things like the TPS and the MAP/BOOST sensor).

 

out of the blue, at first I thought it was the map sensor but its not i checked all the lines to see if there are any loose but cant find anything wrong

 

bump

 

Try driving it around for a bit. See if it just needs to burn off some oil. It could be several things but you are going to have to get your hands dirty and start checking a few things.

Check your fluid levels, see if anything is lower than normal. To the quck Coolant Bubbles test, etc.

 

not familer with the coolant bubble test, please explain

 

so it may not necessarilly be the engine thats the problem?

 

now its black smoke not white, maybe too rich