Help with Radiator identification
#1
Junior Member
Thread Starter
Help with Radiator identification
So I finally had to get under my FD for the first time since purchasing her to change out the starter. I Went with the 2kw from RX7.com. While I was under I removed the plastic shield under the radiator to check general condition of everything I could get to. This looks to be an upgraded radiator but since I haven’t done much work yet on FD’s I’m not sure. I’m guessing it’s upgraded since it’s all aluminum. I was hoping someone could at least confirm it’s not stock and if they recognize the brand. I saw no markings. The car sat for a good 8 years and was rarely driven when I got her. The previous owner did upgrade items but had no records. Thanks for any help 🤙🏼
#2
Rotary Freak
It's a koyo. If you clean up that end tank, or get a pic of the top tank, you should be able to see if there's a divider - and whether multi-pass.
The following users liked this post:
firecaddie (06-10-20)
#3
RX-7 Bad Ass
iTrader: (55)
Yep, looks like a Koyo. It will be stamped on the top tank but you would have to take stuff apart to see it.
It's an excellent radiator, the previous owner did you right there.
Dale
It's an excellent radiator, the previous owner did you right there.
Dale
The following users liked this post:
firecaddie (06-10-20)
Thread
Thread Starter
Forum
Replies
Last Post
SM Polishing
2nd Generation Specific (1986-1992)
21
03-03-03 04:22 PM