Help Please DIagram needed!!!!
#1
Part out my Car
Thread Starter
Join Date: Feb 2002
Location: Denver, Colorado
Posts: 1,762
Likes: 0
Received 0 Likes
on
0 Posts
Help Please DIagram needed!!!!
AS most of you know i am putting my new motor back in, and i need a diagram o rnot the hose but the connectors. Or anything that shows me where all those damn connectors and hose go. I already have the hose one and its kind of helping. Is there anything better. Thanks Marc
#2
Hamado things my way!
Join Date: Oct 2001
Location: Pensacola, Florida
Posts: 1,245
Likes: 0
Received 0 Likes
on
0 Posts
The only diagram of connectors that I have seen is the one in the FSM, and it looks like a clusterf#ck. I replaced my wiring harness a while back, and was, at first, overwhelmed by the task of putting things back together. You see the old harness was baked to the point that it was permanently shaped in the position that it needed to go. The way I figured the new harness out, was to find connectors whose locations I knew well. I layed it out in a manner that looked good, and started plugging things in. Most connectors are different, so it won't be as hard as you're thinking.
#4
Recovering Miataholic
Marc,
http://www.zeroglabs.com/rx7/reference.htm
http://www.scuderiaciriani.com/rx7/v...se_diagram.jpg
http://rx7.voodoobox.net/
These are mostly help with the vacuum hoses, but the last one also shows some downloadable pics of hoses and connectors.
---- Bill
http://www.zeroglabs.com/rx7/reference.htm
http://www.scuderiaciriani.com/rx7/v...se_diagram.jpg
http://rx7.voodoobox.net/
These are mostly help with the vacuum hoses, but the last one also shows some downloadable pics of hoses and connectors.
---- Bill
#5
Part out my Car
Thread Starter
Join Date: Feb 2002
Location: Denver, Colorado
Posts: 1,762
Likes: 0
Received 0 Likes
on
0 Posts
cool thanks alot, is there anything that if i mix them up like the fuel rail by puting them in back works could be fatal. Is there anything that could be fatal to my new motor. Thanks For the help guys ill look into it. Thanks Marc
#6
Part out my Car
Thread Starter
Join Date: Feb 2002
Location: Denver, Colorado
Posts: 1,762
Likes: 0
Received 0 Likes
on
0 Posts
and some more questions i have. In the work shop manual on page c 87 the intake manifold has a hose that connects to some circular shapred thing. The little nipple is broken off and i think its a plastic solenoid. The hose shoud is black and i think that it might me a original, so its it alright to replace that one with the silicon ones. Adn the other one is kinda the sam question. Are the original hoses on the motor back and really had. I am just assuming this because there was a 1/2 asses orange silicone hose job done. Hope someone can help. Marc
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
David Hayes
3rd Generation Specific (1993-2002)
13
09-05-22 12:45 PM