JSpecRZ

is anyone familiar w/ the connectors on my battery harness?? This is what i have plugged up so far(including on the battery side) I'm not sure what plug 1 and plug 2 are... some assitance is appreciated...
oh and if some that i labeled are wrong.. please let me know... thanks guys!!!

c00lduke

I'm pretty sure the one you have labeled oil press isnt but the oil press is on the main harness, a diagram of the harness is on C107 but still isnt very clear on where they plug in. It kinda seem they plug into the main harness.

JSpecRZ

I think i know what your talking about... the one off the main harness goes to the connector that is on the block... right under the oil filter..

Goober

Yep, thats the oil pressure sensor connector. Some close up pictures of the mystery plugs might help out.

Tomco78

I think that the number 1 is for the oilpan level..

Tomco78

The number 2 plug actually connects to the engine harness, I've just checked.
I think you are right about the other ones.

twinturborx7pete

iTrader: (3)

#1 = coolant buzzer from main engine harness
#2 = possibly pwr steering or a/c, you'll know when you line them up on the car.

there should be 1 for oil pressure sender, and one for the coolant thermosensor gauge that goes into the rear side housing. The plug for the oil level sensor is also by these 2.

JSpecRZ

Thanks guys... i'm going to try it out.... I'll also put this on my site after I fix it from being hack.. :cry:

here is an updated pic as of right now...

twinturborx7pete

iTrader: (3)

jayspec, ur website.. doesn't seem to work..?

spooledUP7

how about the knock sensor

JSpecRZ

yeah.. my site was hacked... I should be fixing it soon..

JSpecRZ

I think the knock sensor plugs into the main harness right behind the alternator...

cover8

This is correct...a/c and power steering are close...the knock sensor is a clip like the oxygen sensor (in appearance)...white clip is a/c ...the oil level is a white clip that looks like a shotgun (side by side) but has only one wire.