3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

HELP I need HELP!

Thread Tools
 
Search this Thread
 
Old Jul 9, 2005 | 09:29 PM
  #1  
RX-Racer's Avatar
Thread Starter
Aoohh!!!
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 542
Likes: 0
From: Pacific Beach, CA
HELP I need HELP!

Car won't start due to no spark.

I have initial spark when key is turned on
but no spark when cranking.

Crank angle sensors good.

What else is there to check!

HELP I NEED IT RUNNING TONIGHT!

JP
Reply
Old Jul 9, 2005 | 09:39 PM
  #2  
RX-Racer's Avatar
Thread Starter
Aoohh!!!
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 542
Likes: 0
From: Pacific Beach, CA
Helllllllllllllp
Reply
Old Jul 9, 2005 | 09:43 PM
  #3  
TwinTurbo93's Avatar
0-rotor-0-turbo-0-fd
Tenured Member 15 Years
 
Joined: Sep 2002
Posts: 1,640
Likes: 0
From: NYC
Coils and they're wiring harness, Igniter (on left fender by the cruise control) check the ground, you might want to remove it and clean the back and reinstall to gain proper ground. That thing can go bad also.

That's all I can think of right now.
Reply
Old Jul 10, 2005 | 03:01 AM
  #4  
RX-Racer's Avatar
Thread Starter
Aoohh!!!
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 542
Likes: 0
From: Pacific Beach, CA
bump
Reply
Old Jul 10, 2005 | 08:26 AM
  #5  
RX-Racer's Avatar
Thread Starter
Aoohh!!!
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 542
Likes: 0
From: Pacific Beach, CA
bump
Reply
Old Jul 10, 2005 | 11:07 AM
  #6  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
You might start with a little background of the problem. Was it running and now it's not? Did you just drop in a new/rebuilt motor and it won't start?

We aren't mind readers.
Reply
Old Jul 10, 2005 | 11:45 AM
  #7  
RX-Racer's Avatar
Thread Starter
Aoohh!!!
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 542
Likes: 0
From: Pacific Beach, CA
New motor and was running with the haltech at one time
Reply
Old Jul 10, 2005 | 12:16 PM
  #8  
racer1's Avatar
flying apex seal
Tenured Member 20 Years
 
Joined: Jul 2003
Posts: 747
Likes: 0
From: Cyprus
battery
Reply
Old Jul 10, 2005 | 12:30 PM
  #9  
mad_7tist's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 1,899
Likes: 0
From: tampa
wtf do you mean you have spark with the key on but not while cranking?
Reply
Old Jul 10, 2005 | 12:41 PM
  #10  
RX-Racer's Avatar
Thread Starter
Aoohh!!!
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 542
Likes: 0
From: Pacific Beach, CA
I took a wire off of one of the spark plugs and then put a spark plug in it outside
of motor, grounded it out and turned the key on . . . one spark happens. Then when
I crank the motor there is no sparks.

JP
Reply
Old Jul 12, 2005 | 12:40 PM
  #11  
TwinTurbo93's Avatar
0-rotor-0-turbo-0-fd
Tenured Member 15 Years
 
Joined: Sep 2002
Posts: 1,640
Likes: 0
From: NYC
Any news, got the spark back?
Reply




All times are GMT -5. The time now is 12:14 PM.