Has anyone used CC fab lab LCA ball joints?
#1
Has anyone used CC fab lab LCA ball joints?
I came across this website which sells front LCA ball joints that can be retrofitted to our non-serviceable control arms.
https://ccfablab.com/product/cc-fron...-kit-rx7-fd3s/
I haven’t heard of anyone using them before, but so think I will try out a set. They don’t list any install instructions on the website, so I’m also wondering if any special tools are required.
https://ccfablab.com/product/cc-fron...-kit-rx7-fd3s/
I haven’t heard of anyone using them before, but so think I will try out a set. They don’t list any install instructions on the website, so I’m also wondering if any special tools are required.
#3
RX-7 Bad Ass
iTrader: (55)
It looks like they intend to have a video on how to install. First I've heard of these, that would be a good way to go.
BTW that kit includes 2 of them which is nice.
Dale
BTW that kit includes 2 of them which is nice.
Dale
#4
Senior Member
iTrader: (4)
I would want to know how to get the original ball joints out of the arms first. Originally, it's not a serviceable assembly.
For example, I bought Moonface Super Lap LCAs back in 2014, and they mill the OE ball joint out in order to install a ball joint with a longer stud (roll center correction).
For example, I bought Moonface Super Lap LCAs back in 2014, and they mill the OE ball joint out in order to install a ball joint with a longer stud (roll center correction).
#5
RX-7 Bad Ass
iTrader: (55)
^Good point. I don't know if they are staked in there or what, never looked that far into it. It's quite possible a machine shop would be involved.
Dale
Dale
Thread
Thread Starter
Forum
Replies
Last Post
Jhereg
1st Generation Specific (1979-1985)
16
04-22-13 12:29 AM