Has anyone used CC fab lab LCA ball joints?
I came across this website which sells front LCA ball joints that can be retrofitted to our non-serviceable control arms.
https://ccfablab.com/product/cc-fron...-kit-rx7-fd3s/ I haven’t heard of anyone using them before, but so think I will try out a set. They don’t list any install instructions on the website, so I’m also wondering if any special tools are required. |
Nice!
you'll need to press out the old ball joints but it looks like these are held by the large nut. Why don't you contact CC for instructions and recommendations? |
It looks like they intend to have a video on how to install. First I've heard of these, that would be a good way to go.
BTW that kit includes 2 of them which is nice. Dale |
I would want to know how to get the original ball joints out of the arms first. Originally, it's not a serviceable assembly.
For example, I bought Moonface Super Lap LCAs back in 2014, and they mill the OE ball joint out in order to install a ball joint with a longer stud (roll center correction). |
^Good point. I don't know if they are staked in there or what, never looked that far into it. It's quite possible a machine shop would be involved.
Dale |
Originally Posted by DaleClark
(Post 12453667)
^Good point. I don't know if they are staked in there or what, never looked that far into it. It's quite possible a machine shop would be involved.
Dale |
All times are GMT -5. The time now is 02:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands