Has anyone replaced their charge relief valve with BOV?
#3
Banned. I got OWNED!!!
Thread Starter
Join Date: Feb 2001
Location: Silicon Valley Bay Area
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
i heard it makes noise until the 2nd turbo kicks in.
is that true?
if so is it loud nad/or does the sound vary with the amount of throttle ur giving it?
is that true?
if so is it loud nad/or does the sound vary with the amount of throttle ur giving it?
Trending Topics
#12
1JZ powered
Join Date: Jul 2001
Location: Where there's only two seasons, hot and wet! I love Okinawa
Posts: 4,423
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by jayk
When venting either one does it need filtering, or can it just be disconnected from the airbox?
When venting either one does it need filtering, or can it just be disconnected from the airbox?
#14
Speed Mach Go Go Go
iTrader: (2)
Join Date: Oct 2001
Location: My 350Z Roadster kicks my RX7's butt
Posts: 4,772
Likes: 0
Received 2 Likes
on
2 Posts
Tri-Point puts little filters on them when they install their colder than hot air box. My friend thinks it's cause it sucks air but I think they do it to quiet down blow off noises. I don't hear his BOV at all.
Last edited by GoRacer; 09-20-02 at 09:35 PM.
#15
I'm a CF and poop smith
They are the same exact part (the CRV and the BOV, they are both BOVs), in anycase, i vent mines to atmosphere and my friends say that when I blowoff at about 5-7psi, they can hear it about 10 cars back with the windows down and about 5 cars back with their windows up (I kinda question this since it sounds pretty soft from the inside). I'm running non-seq with only 1 stock bov right now with slight modificatins to the stock bov
BTW: My stock BOV is the loudest I have heard with the exception for a friend with a MKIV Supra which is running about 28-30+psi with a old style greddy/hks bov (I forget which one), that thing is freakishly loud and sounds like a lazer gun.
BTW: My stock BOV is the loudest I have heard with the exception for a friend with a MKIV Supra which is running about 28-30+psi with a old style greddy/hks bov (I forget which one), that thing is freakishly loud and sounds like a lazer gun.
Last edited by skunks; 09-20-02 at 09:55 PM.
#16
Rotary Enthusiast
iTrader: (2)
When you are at idle, the CRV is open (there's vacuum at the little hose) and you are pulling vacuum at the manifold. Seems to me you are sucking air back through the CRV.
I'm not saying this is right because I haven't checked, but it seems logical...
Am i missing something?
I'm not saying this is right because I haven't checked, but it seems logical...
Am i missing something?