hard starting after warmed up
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: texas
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
hard starting after warmed up
i have a problem with my 93 rx7 after i warm it up to normal tempature and drive it for a while after turning it off it will be hard to start can anybody please help me.
#4
Senior Member
Join Date: Apr 2008
Location: Milton keynes,UK
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
only theoretically but maybe it is something to do with double throttle? (its a guess i'm not that experienced...):
http://www.rx7.org/Robinette/double_throttle.htm
http://www.rx7.org/Robinette/double_throttle.htm
#5
Full Member
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: texas
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
hard starting
i just did a rebuild onmy engine apex seals,side seals,corner seals, rotor bearings etc,etc, and its stills give me hard starting and i just cant figure it out but thanks for all the replys if there is any thing else yall can think of i would appreciate it thanks, you guys
Trending Topics
#8
wannaspeed.com
iTrader: (23)
even if it's just been rebuilt you should get the compression checked. Thats the first thing you should check.
The FPR solenoid is used for hot starts by lowering the pressure in the rail, it could contribute to issues if there is another problem, but many people have removed this solenoid (including me) with no starting issues.
The FPR solenoid is used for hot starts by lowering the pressure in the rail, it could contribute to issues if there is another problem, but many people have removed this solenoid (including me) with no starting issues.
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM