Okay guys. You have all been a great help to me and it is because of this forum that I pulled my engine and did the reinstall myself. After reinstalling my rebuild and the engine runs fine.

The problem is the Speedo, tach, and water temp guages don't move at all. The Oil pressure always reads high. The pressure sensor and temp sensor are wired correctly to the harness. Check engine light codes are 11, 15, 17, and 40.

What am I missing?

 

http://www.fd3s.net/engine_codes.html
11 Intake air thermosensor (engine)
15 oxygen sensor
17 Feedback system for O2 sensor
40 Solenoid valve - purge control (auxilary port valve)

 

There's a white connector that goes up under the dahs that connects to the engine harness on the passenger side. Make sure it is plugged in.

 

Thanks Rotary Expeirment!! That was indeed the problem. You rock!