Guages don't work after rebuild
#1
Guages don't work after rebuild
Okay guys. You have all been a great help to me and it is because of this forum that I pulled my engine and did the reinstall myself. After reinstalling my rebuild and the engine runs fine.
The problem is the Speedo, tach, and water temp guages don't move at all. The Oil pressure always reads high. The pressure sensor and temp sensor are wired correctly to the harness. Check engine light codes are 11, 15, 17, and 40.
What am I missing?
The problem is the Speedo, tach, and water temp guages don't move at all. The Oil pressure always reads high. The pressure sensor and temp sensor are wired correctly to the harness. Check engine light codes are 11, 15, 17, and 40.
What am I missing?
#2
Originally Posted by mecman
Okay guys. You have all been a great help to me and it is because of this forum that I pulled my engine and did the reinstall myself. After reinstalling my rebuild and the engine runs fine.
The problem is the Speedo, tach, and water temp guages don't move at all. The Oil pressure always reads high. The pressure sensor and temp sensor are wired correctly to the harness. Check engine light codes are 11, 15, 17, and 40.
What am I missing?
The problem is the Speedo, tach, and water temp guages don't move at all. The Oil pressure always reads high. The pressure sensor and temp sensor are wired correctly to the harness. Check engine light codes are 11, 15, 17, and 40.
What am I missing?
11 Intake air thermosensor (engine)
15 oxygen sensor
17 Feedback system for O2 sensor
40 Solenoid valve - purge control (auxilary port valve)
Thread
Thread Starter
Forum
Replies
Last Post