hello im installing a greddy fmic and having some trouble with the power steering pipe. i dont realy know how to make it fit :P so if any of you guys have any pics please show me

thanks

 

I dont have any pix, But it is easy if you follow the instructions. If you dont have them, Google the type of front mount you have and download them. Rix

 

Is it a new kit you have, Or a second hand one. Rix

 

its a second hand one. and my car comes from japan so its missing like a 1000 screws and brackets.

 

When I installed my greddy fmic, I took off the old powersteering line, the one that was provided bolted up fine. I used the old brackets the mount it.

Dennis,

 

Im quessing you are missing the greddy ps cooler pipe. Will take a pic of my dads fitted and a measure and you might have to mod yours or poss get a small oil cooler to fit in its place. Rix

 

You are missing the Greddy PS loop line. I should have one in about a week I wont need as my PS is deleted. If you can wait I will sell it to you for the cost of shipping.

 

i have the S formed pipe. i just dont know what to mount it on :P the holes that is

 

Here ya go. hopefully they are clear enough. I snapped em with my phone. AND YEAH YEAH YEAH, I know its dirty, I am pulling the motor and everything is getting a thorough scrubbing.




Basically there are two points that fasten to the subframe, and one fasten point under the black crossbar (not installed on my car atm) on the driver side of the car. Hope these help.

If you do not have the brackets it uses to attach just pic up some thin metal from the hardware store. The greddy supplied ones are nothing more than very thin metal folded over the ps cooler line.

 

thanks that helps alot