Gotham Short Shifter
#3
I'm the Juggernaut BITCH!
iTrader: (7)
There's really no trick to it, it's probably one of the simplest installs there is. Just don't be afraid to use a hammer on the stock shifter because it is gonna be stuck on there pretty good. Also check the bearing/bushing thing at the bottom of the shifter, if it's damaged get a new one from malloy, otherwise just switch it over and your good to go.
#7
Fast + Reliable = $$$$$
iTrader: (18)
Just seal it with some silicone. Kai is right, I accidently dropped my old shifter on the floor mat and it smelled horrible even after 3 months.
Also, it definitly CAN be somewhat of a pain if the top right bolt of the shifter is tucked away in there.(mis-aligned tranny,etc) Use a thick screw driver/ bar to pry the tranny a little to the left if that's the case...that should give enough room to get the socket on that bolt.
If that doesn't do it, PM me and I'll let you know how I took mine off. I'm sick of typing for now.
Also, it definitly CAN be somewhat of a pain if the top right bolt of the shifter is tucked away in there.(mis-aligned tranny,etc) Use a thick screw driver/ bar to pry the tranny a little to the left if that's the case...that should give enough room to get the socket on that bolt.
If that doesn't do it, PM me and I'll let you know how I took mine off. I'm sick of typing for now.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post