Got Rx7store Extreme Fuel System need help
#2
AponOUT!?
iTrader: (31)
FPR monuted to UIM:
Kit installed:
One more pic...just took this one a few days ago.
I'm actually about to re-do mine to run the rails in parallel.
Cheers.
#3
Mr. Links
iTrader: (1)
Not the exact same kit, but it will be similar:
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/fuel-system-upgrade-how-write-up-kgparts-kit-404091/
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/fuel-system-upgrade-how-write-up-kgparts-kit-404091/
#5
Eats, Sleeps, Dreams Rotary
iTrader: (52)
In the LIM injector holes. You will see that if you try to place the Bosch injectors in without them, they fit loose. They fit snuggley with the spacers placed in. If you have a heard time getting the spacers to fit in evenly, hit them with sand paper to make them slightly smaller, they should slide right in.
#6
AponOUT!?
iTrader: (31)
In the LIM injector holes. You will see that if you try to place the Bosch injectors in without them, they fit loose. They fit snuggley with the spacers placed in. If you have a heard time getting the spacers to fit in evenly, hit them with sand paper to make them slightly smaller, they should slide right in.
Trending Topics
#11
Full Member
iTrader: (2)
Join Date: Feb 2008
Location: Ontario
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
I know this is bringing this back from the dead. But since keep the stock primary injectors and rail in this kit what do we do with the fuel pulsation dampener? and can someone show me a diagram of how the system is with the stock primary injectors and rail?
Thread
Thread Starter
Forum
Replies
Last Post
Snook
3rd Generation Specific (1993-2002)
21
09-01-15 06:32 PM
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM