godspeed intercooler
#27
FD** Fire Disaster
iTrader: (15)
I'm using a Godspeed core that came with my Defined Autoworks V-mount kit. From Godspeed's website, its rated efficient up to "450hp" I have no complaints so far but I've only really used it on stock twins and not high boost on my current single setup. Intake temps never increased when doing pulls over and over back to back.
#29
Don't worry be happy...
iTrader: (1)
No one is really answering you because its such an easy search.
But I'll help you out:
Typically with an aftermarket IC, you'll need to replace the intake because *most* do not allow room for the stock intake. Also depending on your setup, you might need to relocate the battery or switch to a smaller one. Again this all has to do with room in the engine bay.
You will very likely need a boost controller as most aftermarket IC have a lower pressure drop and a greedy elbow. But do your research on what hardware is included and what it bolts up to before making a purchase.
BTW the search feature is your friend
#30
2SoonJr
iTrader: (8)
Join Date: Mar 2008
Location: OrangeCounty-Santa Ana
Posts: 525
Likes: 0
Received 5 Likes
on
4 Posts
I've been hearing a lot of good things in regards to Godspeed inter-coolers, i know a few rotary shops that run and build Vmounts with them, and the owner of GarageLife (DK) has been running the inter-cooler along with big *** godspeed turbo (GT45) and other things in his drift/autoX car, and for the most part he hasn't any issues producing 500+ HP for the past 4 years nor has he even had to replace or rebuild it.
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM
MILOS7
3rd Generation Specific (1993-2002)
0
09-18-15 03:39 PM