Future Mod List - Troubleshoot please
#1
Former Rotorhead
Thread Starter
Join Date: May 2002
Location: Midland, MI
Posts: 1,926
Likes: 0
Received 0 Likes
on
0 Posts
Future Mod List - Troubleshoot please
Hey everyone...
I was bored today so I compiled a list of all the mods I want to get sometime in the future. Let me know what you think, OK?
Exterior:
- FEED front
- FEED sides
- RE rear diffuser
- FEED spoiler
- FEED CF door handles
- Rotary Extreme HID headlights
- Rotary Extreme Scoot Replica hood (Carbon Fiber)
- BBS RGR rims
- Spirit R Titanium Silver Metallic Paint
Interior:
- Corbeau Seats
- M2 Harness bar
- Schroth Rallye 4 harnesses
- Aluminum floor mats
- Black carpet
- MOMO aluminum door sills
- MOMO competition pedals
- MOMO Jet wheel
Performance:
- GT35/40 Single
- Blitz FMIC
- Koyo stand-up radiator
- Blitz intake (next week )
- Pettit downpipe (next week )
- Apexi Power FC
- Gauges
- 1600cc secondaries, 850cc primaries
- Polished aluminum fuel rails
- Upgraded fuel pump
- Greddy intercooler piping
- Blitz BOV
- Blitz Power meter
- Blitz turbo timer
- Blitz boost controller
- Tokico struts
- Eibach springs
- M2 Reduced 5th gear
- Cusco front strut tower brace
- Torque brace
- Battery relocation
- Blitz Nurspec Catback
- ACT clutch and lightened flywheel
I am probably forgetting a few things - let me know what you think, if you want.
Tyler
I was bored today so I compiled a list of all the mods I want to get sometime in the future. Let me know what you think, OK?
Exterior:
- FEED front
- FEED sides
- RE rear diffuser
- FEED spoiler
- FEED CF door handles
- Rotary Extreme HID headlights
- Rotary Extreme Scoot Replica hood (Carbon Fiber)
- BBS RGR rims
- Spirit R Titanium Silver Metallic Paint
Interior:
- Corbeau Seats
- M2 Harness bar
- Schroth Rallye 4 harnesses
- Aluminum floor mats
- Black carpet
- MOMO aluminum door sills
- MOMO competition pedals
- MOMO Jet wheel
Performance:
- GT35/40 Single
- Blitz FMIC
- Koyo stand-up radiator
- Blitz intake (next week )
- Pettit downpipe (next week )
- Apexi Power FC
- Gauges
- 1600cc secondaries, 850cc primaries
- Polished aluminum fuel rails
- Upgraded fuel pump
- Greddy intercooler piping
- Blitz BOV
- Blitz Power meter
- Blitz turbo timer
- Blitz boost controller
- Tokico struts
- Eibach springs
- M2 Reduced 5th gear
- Cusco front strut tower brace
- Torque brace
- Battery relocation
- Blitz Nurspec Catback
- ACT clutch and lightened flywheel
I am probably forgetting a few things - let me know what you think, if you want.
Tyler
#4
The Power of 1.3
Join Date: Aug 2001
Location: Shrewsbury, Massachusetts
Posts: 2,837
Likes: 0
Received 0 Likes
on
0 Posts
Can I drive your car when it's done....?
No, but seriously, sounds good, but $$$$!. I have a list like that floating around in my head.
One thing I noticed, you will need brakes with all that done to the engine, and how about shocks/springs?
No, but seriously, sounds good, but $$$$!. I have a list like that floating around in my head.
One thing I noticed, you will need brakes with all that done to the engine, and how about shocks/springs?
Trending Topics
#9
Rotary Enthusiast
Join Date: Jul 2001
Location: Nashville, TN
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
Seems to be a dream list of mods. Doubt it'll all come together for you hehe unless u have bottomless pockets, we always have to settle for something a little more realistic
You've got a majority of FEED stuff, why put a Scoot hood in there? It ruins it. If you are actually getting genuine parts, why not get a FEED hood as well? It wont be that much more in the grand scheme of things. I decided to wait on a FEED hood since most of my stuff is genuine FEED anyway.
You've got a majority of FEED stuff, why put a Scoot hood in there? It ruins it. If you are actually getting genuine parts, why not get a FEED hood as well? It wont be that much more in the grand scheme of things. I decided to wait on a FEED hood since most of my stuff is genuine FEED anyway.
#10
Former Rotorhead
Thread Starter
Join Date: May 2002
Location: Midland, MI
Posts: 1,926
Likes: 0
Received 0 Likes
on
0 Posts
That's actually a couple of things I forgot to add:
- RX7store.net Short shifter
- Cross drilled and slotted brake rotors
Tires:
Bridgestone Potenza S-03 Pole Position tires in sizes
235/40ZR18 front and 265/35ZR18 rear
It'll cost around $35,000 in all, which is still less than a new car (at least the ones I would want)
When it's done, I will probably drive it around sometimes, take it to shows, and other things, but have a normal car as a daily
My car is pretty much stock right now, but I've only had it for 5 months, and I have to pay for school and stuff. I'm just waiting until I get some good income before I start in on it heavy.
I don't know what to say to the people writing about the stickers and paint - I don't think that list is "ricey" at all, and I hated the F&F. Get to know me before you make stupid judgements about me.
I like the Scoot hood because of the aggressive style and for the cooling properties. I don't know - I just kind of like it.
- RX7store.net Short shifter
- Cross drilled and slotted brake rotors
Tires:
Bridgestone Potenza S-03 Pole Position tires in sizes
235/40ZR18 front and 265/35ZR18 rear
It'll cost around $35,000 in all, which is still less than a new car (at least the ones I would want)
When it's done, I will probably drive it around sometimes, take it to shows, and other things, but have a normal car as a daily
My car is pretty much stock right now, but I've only had it for 5 months, and I have to pay for school and stuff. I'm just waiting until I get some good income before I start in on it heavy.
I don't know what to say to the people writing about the stickers and paint - I don't think that list is "ricey" at all, and I hated the F&F. Get to know me before you make stupid judgements about me.
I like the Scoot hood because of the aggressive style and for the cooling properties. I don't know - I just kind of like it.
#11
Rotary Enthusiast
Join Date: Jul 2001
Location: Nashville, TN
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
I'm not that high on the Scoot hood. But if you like it, it's your car I dont think it matches very well with the FEED body. Some people already have the combo you're putting together because of RotaryExtreme's great prices, and the paint color seems to be very popular nowadays. So maybe you might want to look into changing that up a lil.
Oh I forgot something too. I've riden on Eibach's and Konis, and one with JIC FLTA2s. Get some JICs, well worth the money
Oh I forgot something too. I've riden on Eibach's and Konis, and one with JIC FLTA2s. Get some JICs, well worth the money
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
10-09-15 10:05 PM