Fuel pump is down
#1
Rotary Enthusiast
Thread Starter
Fuel pump is down
My fuel pump is not running. I'm showing zero pressure. The 20a fuse under dash is ok. I removed the plastic cover off the fuel pump relay and it is not energizing. Even manually engaging the relay does not work. I can't fing my voltmeter but I assume the relay is not getting power. Is this an ignition switch issue, or where would I look?
#5
Rotary Enthusiast
Thread Starter
No, not the same problem. I ran a jumper to the power lead at the tank and the pump runs. Its something that supplies power to the relay. I'm guessing it's the ignition switch. I will be putting a switch in to run pump by itself, today.
#6
What's your point ?
Join Date: Feb 2001
Location: Gainesville, Fla.
Posts: 3,573
Likes: 0
Received 0 Likes
on
0 Posts
You wouldn't have to guess if you down load the FSM and Electrical diagrams from the sticky at the top of the forum.
#7
Rotary Enthusiast
Thread Starter
If I was a whiz at electrical diagrams, you would be correct. I did look at them but thats not my area of expertise. Thats why I asked for help
Trending Topics
#8
Rotary Enthusiast
Thread Starter
By manually, I mean I pulled the plastic cover of of the relay where the coil was visible and squeezed the contacts together. There is no power to the relay whatsoever.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
ChrisRX8PR
Single Turbo RX-7's
21
10-18-15 04:01 PM