Fuel line size
#1
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Boulder Colorado
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Fuel line size
Sorry for the simple question. I've done a bit of searching and came up with two sizes. I'm looking into moving my Fuel Filter so it isn't such a PITA to change. I've seen people say that the line size is -5 and -6 (5/16" and 3/8" respectively) , so does anyone know for sure which size it is? Also, does the shop manual have a section that has hose specs like this? I didn't see anythign when I skimmed. Thanks!
#2
Rotary Freak
The stock line is metric , about 5/16. My mechanic has changed his from the pump coupling to the front to 3/8 inch. He put the filter on the rear of the rear sub frame using the stock filter bracket. Drill and tap two holes and you are done. He uses a filter with screw in lines so there is no pulling lines off and pushing them back on. d Do not put the filter in the engine bay.
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM