does anyone have pictures of front mount intercoolers with the in/outlets facing away from the core mounted on a FD, not sure how i will route the piping or if it will even work because i dont want to cut holes on the car.

since everything was out i put the intercooler v-mounted just to see how it looks.

 

I don't understand the question. Anybody with a fmic is not going to have piping that would help you out with the V-mount. It looks like with that set-up your best bet would probably be to run the piping as straight down as possible from the stock piping still showing and not attempt to come around the side. Thats a tough one.

 

I have the same intercooler. I reworked the inlet and outlet to come out the back. Any good fabshop should be able to do it for around $100

 

im not doing a v-mount those pics where just for fun, almost all FD front mounts kits have the in/oulets facing towards the engine my intercooler has them facing straight out of the core and i just wanted to see if anyone had pictures of the same style intercooler to get an idea on how to route the piping

 

impactwrench got any pics?

 

here, this was my car that i did custom... it should give you some ideas of how to route.

 

cool, the bottom part of the pipiing was what i had wanted to see thanks, i was thinking of using those silicone 90's too

 

you know if you could get the end tank moded that IC would make a nice V-mount

 

You have been buster with the F&F NOS bottle

 

lol, those pics were taken at TurboXS, the shop is sponsered by nx so we have a ton of whatever bottles they sent us.

 

this help man, my own creation

 

lol


but no wait the block! and the save:

sorrry guys I must be really bored at work...

 

since the end tanks need to be modified i decided to v-mount the intercooler i really wanted to see how the piping would look and i could not wait for the aluminum u-bends to get delivered so i made some out of scrap aluminum and paper.

 

wow... that would look nice. Just don't drive on that, but I bet you already knew that. LOL.

 

Looks good....but??

 

but.....

its suppose to be cooled.... how would it be cooled sitting like that?

 

lookin good man. I gotta come check it out again when its all done.

 

you never seen a v-mount?

saburo, when its done and polished im going to roll up to fusion with no hood on j/k.

 

It looks to me like you are putting allot of time and money into that machine. So I would like to share this bit of wisdom. iiGet yourself the Efini-Ypipe!!... I'm sure I can speak for allot of members in here when I say "it's a must have especially when you are raising the boost over stock"