I am not familiar with electricals so I don't really know what to do with the lights...anyone has done it themselves and can provide tips?

 

Which lights are you refering to?

 

Buy the lamp converter plugs and it is just a plug and go install. no cutting wires and splicing them in and they are cheap.

http://www.rhdjapan.com/jdm/FEED-Lam...ses-FD3S-26436

 

thanks, but I think this is the harness for 99spec bumper lights, not what I am looking for.

 

I bought these when i installed my halogen Feed turn signals and the shop that installed them said it was a plug and play install. The description on the website said

"The converter kit is made for those with the zenki/before minor change combination lamps and are looking to upgrade to the kouki/after minor change 99+ spec lenses. It will allow you to upgrade painlessly without needing to cut or splice into your oem harnesses."

 

He is not looking for the 99 turn signals, instead the FEED turn signals, which are two totally different things. You can see the difference here

 

i know that they are two different things. The Feed halogen lights plug into the stock +99 wiring harness. If you dont have a +99 wiring harness then you need to get the adapters. Like i said I have these and I have the Feed turn signals. You will have to run wires from the fog lights to a switch but to just use the turn signal part of the lights then you will need the adapters or you will need to cut and splice in the feed lights. If anyone would like I can take a pic of how they plug in so you can see how easy it is to install them

 

Do the FEED lights come with a switch for the fogs/driving lights? Mine should be arriving later this week.

 

Yes but it looks real cheap. I installed the switch on the center counsel by the rear defogger switch. The shop had some nice switches that they installed instead of the cheap looking one. I will be posting some pics up later today so that people know how easy it is to install.

 

Cheers mate

 

spr258 - pics will be great! I already have the 99spec harness adapter so hopefully that makes it easier.

 

Basically
do you have the wiring kit for the fog light, if you do then just wire it up like it was separate, should have a relay and a switch

As for the parking and signal, you just splice your stock harness, with a voltage meter or one of those things that light up when you pierce the wire, turn your signal light on to find which wire and turn your parking ligts on so you know which one it is, then just splice them to the new parking and turn lamps on the FEED lights and ground them and your done.