fan relay plug connectors
fan relay plug connectors
i have been battling an electrical issue for a couple weeks now and it is all coming from my fan relay plug connectors. the are in really bad shape but the relays themselves are good. does anyone know where i can get some good 4 wire plug connectors that i can replace them with. no automotive stores here carry them or can get them. any insight on this would help greatly.
Joined: Oct 2001
Posts: 4,772
Likes: 2
From: My 350Z Roadster kicks my RX7's butt
If you can get a replacement wire harness and they are bad enough to cut off then try painless wiring. Call them and see if they can match a pair of connectors for you.
i tried ray but he is out for the day. im guessing that i will have to just get a universal 4 wire plug with wires on both ends to splice into but i cant find any. little suckers are hard to locate.
Unfortunately, Ray cannot get you individual connectors. Follow this link, it should help:
https://www.rx7club.com/showthread.p...ical+connector
https://www.rx7club.com/showthread.p...ical+connector
I used the two pin version of this one to replace my airpump connector. The female side worked fine - I just reinserted the pins. The male side - I had to recrimp new pins on it.
http://www.bmotorsports.com/shop/pro...oducts_id/1094
http://www.bmotorsports.com/shop/pro...oducts_id/1094
You might see if you can still get the fan recall harness from Mazda and use it's connectors. It is a short harness (about a foot long) and plugged into each relay and then into the connectors that used to plug into the relays.
PM me if interested, I may have one.
PM me if interested, I may have one.
Trending Topics
there was a recall harness huh. im gonna have to check into it. how many years ago was the recall. i have tried to get some parts changed out in the past due to recalls and had no luck due to the age of the car.
If your car has not had the brake check valve recall done, do it asap. Mine was never done and one day my brakes went to sh*t. The dealer did the recall for free (its safety related) but did it wrong - they left the old check valve in and just added the second one. Needless to say I never went back there again and just fixed it myself. Since then no one touches my car but me.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
streetlegal?
New Member RX-7 Technical
13
Mar 17, 2022 02:46 PM
The Shaolin
2nd Generation Specific (1986-1992)
9
Sep 14, 2015 07:50 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
Sep 5, 2015 10:23 AM
86rxNa
2nd Generation Specific (1986-1992)
2
Aug 11, 2015 11:51 AM







