exhaust bolts
07-01-05, 04:33 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2004
Location: St. Louis
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
exhaust bolts
im replacing my stock main cat with a high flow today. i was wondering can i reuse the bolts that are used on the main cat? and if i need other ones what size?
07-01-05, 04:45 PM
#3
Senior Member
Thread Starter
Join Date: Jan 2004
Location: St. Louis
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lilroach
yes, you can reuse the studs and nuts. look over the threads but they are usually fine.
07-01-05, 05:50 PM
#7
Rotary Enthusiast
iTrader: (1)
Join Date: May 2003
Location: Dallas
Posts: 1,464
Likes: 0
Received 0 Likes
on
0 Posts
your bonez should have new bolts use them. they are thinner and come with nuts.
the stock ones are locking nuts. ideally they should be replaced, but can be reused without much worry.
u have to remove the small check valce on the stock airpump pipe that connects to the original cat, then replace it with the rubber hose the kit comes with.
the stock ones are locking nuts. ideally they should be replaced, but can be reused without much worry.
u have to remove the small check valce on the stock airpump pipe that connects to the original cat, then replace it with the rubber hose the kit comes with.
Thread
Thread Starter
Forum
Replies
Last Post
