evan's coolant install?
#1
Senior Member
Thread Starter
Join Date: Jan 2002
Location: canada
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
evan's coolant install?
I just installed the sierra coolant to absorb any excess water and old coolant.
However I tried to get some old coolant out of the heater core. By removing the bottom firewall heater
core hose. Only a little came out?
Just how much coolant does that heater core hold?
Should I worry about that excess coolant in there. I plan to drain the Sierra again and Fill with the Evans.
What will happen to the Evans if there is some old water or coolant in there?
jc
However I tried to get some old coolant out of the heater core. By removing the bottom firewall heater
core hose. Only a little came out?
Just how much coolant does that heater core hold?
Should I worry about that excess coolant in there. I plan to drain the Sierra again and Fill with the Evans.
What will happen to the Evans if there is some old water or coolant in there?
jc
#2
Resident Retard
Join Date: Apr 2001
Location: Cockaigne
Posts: 1,918
Likes: 0
Received 0 Likes
on
0 Posts
old water or coolant will contaminate the evans...they say to get the coolant out of the heater core you have to run the car with straight sierra for 15 minutes or so with the heater on full blast. I think that's right. Anyway pineapple racing has a write up on how to do it.
Thread
Thread Starter
Forum
Replies
Last Post
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM