estimated horsepower?
#1
Full Member
Thread Starter
Join Date: Jul 2002
Location: Chicago
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
estimated horsepower?
i am about to make another addition to my 93 R1, but am curious as what impact i can expect...i currently have an apex'i gt spec cb and apex'i intake...(and the other basics... boost gauge, turbo timer, etc)... i am considering a ss downpipe and the power fc...my question is this: what type of horsepower can i expect with these mods on a healthy engine? if there is any other thread that may help me answer this question, please point me towards it...thanks
#5
No Cup Holder Racing
Join Date: Apr 2002
Location: Bay Area
Posts: 1,446
Likes: 0
Received 0 Likes
on
0 Posts
with dp, cb and pfc i did 242 on 103k mile engine at 11psi. whiterocket did 275, he has intake (among other things) in addition to my stuff and his engine is newer i believe.
#6
Full Member
Thread Starter
Join Date: Jul 2002
Location: Chicago
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the responses..any one else have input on what numbers i might achieve? if u happened to dyno your car with these mods, let me know what u got....or better yet, if you have time slips with said mods, let me know the results
#7
Senior Member
iTrader: (3)
results of dino
With a DP and catback and 22k on a healthy motor ,I dinoed at 244.9 hp and 253 1bs of tourque.
Adding a PFC. and intake i got 286 hp.
When I put a midpipe on a few months later i got 293 at ten pounds, we heat sinked the stock IC. so we didnt turn the boost up,but figure about 10 hp for every 1b of boost and would have been in the 300,s. C.
Adding a PFC. and intake i got 286 hp.
When I put a midpipe on a few months later i got 293 at ten pounds, we heat sinked the stock IC. so we didnt turn the boost up,but figure about 10 hp for every 1b of boost and would have been in the 300,s. C.
Trending Topics
#8
No Cup Holder Racing
Join Date: Apr 2002
Location: Bay Area
Posts: 1,446
Likes: 0
Received 0 Likes
on
0 Posts
Re: results of dino
Originally posted by mp5
With a DP and catback and 22k on a healthy motor ,I dinoed at 244.9 hp and 253 1bs of tourque.
Adding a PFC. and intake i got 286 hp.
When I put a midpipe on a few months later i got 293 at ten pounds, we heat sinked the stock IC. so we didnt turn the boost up,but figure about 10 hp for every 1b of boost and would have been in the 300,s. C.
With a DP and catback and 22k on a healthy motor ,I dinoed at 244.9 hp and 253 1bs of tourque.
Adding a PFC. and intake i got 286 hp.
When I put a midpipe on a few months later i got 293 at ten pounds, we heat sinked the stock IC. so we didnt turn the boost up,but figure about 10 hp for every 1b of boost and would have been in the 300,s. C.
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM