Engine Rebuild Time Any Suggestions
#1
Full Member
Thread Starter
Join Date: Aug 2006
Location: Blaine MN
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Engine Rebuild Time Any Suggestions
I am pretty sure that one of my rotors is done for, so finnaly time for rebuilding the motor, i would like any suggestions to the best place to go and around how mch to expect, for rebuid, and street port............
#4
Constant threat
Get a new Mazda reman (about $2800) then have it torn apart and rebuilt professionally by Mr rx7 tt, who will put the most awesome port job on it you can imagine. Talk to him about pricing.
All told, I have $6500 in my rebuild. So be prepared.
All told, I have $6500 in my rebuild. So be prepared.
#5
In the burnout box...
iTrader: (32)
i also had my motor build by Chris Rogers (Mr rx7 tt) he did an amazing job with the rebuild!!! i could have not found a more honest profession person. i lost all track of expense in the build since i've been doing mods with a little "this and that" along the way. if your moneys tight, and i mean tight as if you count your money and have a budget i would just go with a reman from malloy.
#6
rotary sensei
iTrader: (5)
Join Date: Mar 2001
Location: Virginia
Posts: 2,312
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bajaman
Get a new Mazda reman (about $2800) then have it torn apart and rebuilt professionally by Mr rx7 tt, who will put the most awesome port job on it you can imagine. Talk to him about pricing.
All told, I have $6500 in my rebuild. So be prepared.
All told, I have $6500 in my rebuild. So be prepared.
My prices are VERY competetive with other rotary shops and 9 times out of 10 I undercut them.
Oh, thanks for the compliments...
#7
Full Member
Thread Starter
Join Date: Aug 2006
Location: Blaine MN
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mr rx-7 tt
But let him know the rebuild was nowhere near 6500...
My prices are VERY competetive with other rotary shops and 9 times out of 10 I undercut them.
Oh, thanks for the compliments...
My prices are VERY competetive with other rotary shops and 9 times out of 10 I undercut them.
Oh, thanks for the compliments...
what is the average price for a rebuild and a street port? if done by MR tt and where are you located.
Trending Topics
#10
Constant threat
Oh yeah....Chris is very reasonable. I spent a lot of bux on VITON vacuum hoses ($300) a new radiator ($175), new gaskets (more $$$ than I care to dwell on), new (to me) turbos,
all new hoses...every hose, lots of other stuff that added up here and there. The engine, porting, gasket set, and shipping was like....$4500 or so.
I pulled and reinstalled the engine myself.
all new hoses...every hose, lots of other stuff that added up here and there. The engine, porting, gasket set, and shipping was like....$4500 or so.
I pulled and reinstalled the engine myself.
#12
Bibliophile
iTrader: (1)
Join Date: Dec 2005
Location: Anaheim California
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
I'm also looking to do a rebuild and I just came across this site called www.MazdaRX7Engines.com 2500. for an oem rebuild. Now I'm not looking for the cheapest place to do this I just want to know if anyone knows anything about their work.
#16
Banzai Racing
Are you planning on removing and installing the engine , or do you want a shop to do it? If you are looking to drop your car off, it is much easier to locate a competent shop local to you
#17
Constant threat
Originally Posted by StrykerFD3S
I'm also looking to do a rebuild and I just came across this site called www.MazdaRX7Engines.com 2500. for an oem rebuild. Now I'm not looking for the cheapest place to do this I just want to know if anyone knows anything about their work.
I am sure they make a great engine and their service and warranty looks top notch, just don't expect to get a rebuild for $2500 from them.
#18
94 Single Turbo FD
Join Date: May 2006
Location: Calgary, Alberta, Canada
Posts: 1,418
Likes: 0
Received 0 Likes
on
0 Posts
Give Adam a call @ Rx7 Specialties in Calgary Canada....he can do 3mm seals....ceramic coating.....oil mods.......large streetporting.....dowell pinning.......and has some nice other add ons including an oil pan brace........(no leaks/ and strength).....he builds for guys all over the world and does alot of USA engines......the above costs me aprox 6300 us and can handle 500 rwhp(it will be alot less if u pull/install your own motor) ..that includes 2 rotor housings aswell.......403-246-6980.....
Last edited by Smitter; 08-27-06 at 01:49 PM. Reason: left something out
Thread
Thread Starter
Forum
Replies
Last Post
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM