E- Brake Light comes on when down
#1
E- Brake Light comes on when down
whell i donno what it is i cheaked the brake fluid because some one told me that could be it and its in between max and min..... pretty much fine i guess.. donno if thats the prob but when i accel hard like enough to get pushed back in first second and third the ebrake light comes on.. no clue why it just started happening..
#3
Urban Combat Vet
iTrader: (16)
If it's the e-brake, it's likely not hydraulic. The cable linkage is probably loose/stretched, allowing the handle to move enough under acceleration to close the switch, which causes the light to come on. There should be a way to adjust the cable tension. May want to check the FSM.
Last edited by Sgtblue; 02-19-06 at 07:18 AM.
#5
Originally Posted by Sgtblue
If it's the e-brake, it's likely not hydraulic. The cable linkage is probably loose/stretched, allowing the handle to move enough under acceleration to close the switch, which causes the light to come on. There should be a way to adjust the cable tension. May want to check the FSM.
what the hell is a FSM?
#7
Rotary Enthusiast
Join Date: Jul 2001
Location: Nashville, TN
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
The light will come on if your fluid level is low. Top off your brake fluid. If you cant find any leaks in the system you might want to look into a new master/slave combo (I always replace both when one goes bad).
Trending Topics
#9
Urban Combat Vet
iTrader: (16)
Originally Posted by FD3S2005
what the hell is a FSM?
Originally Posted by FD3S2005
master/slave combo? which is?
Last edited by Sgtblue; 02-20-06 at 05:43 AM.
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM