whell i donno what it is i cheaked the brake fluid because some one told me that could be it and its in between max and min..... pretty much fine i guess.. donno if thats the prob but when i accel hard like enough to get pushed back in first second and third the ebrake light comes on.. no clue why it just started happening..

 

just top off your brake fluid and see if it goes away. it's a cheap and easy fix, and that solved the exact same problem for me.

 

If it's the e-brake, it's likely not hydraulic. The cable linkage is probably loose/stretched, allowing the handle to move enough under acceleration to close the switch, which causes the light to come on. There should be a way to adjust the cable tension. May want to check the FSM.

 

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/parking-brake-light-stays-how-tighten-handle-39072/

 

what the hell is a FSM?

 

factory service manual

 

The light will come on if your fluid level is low. Top off your brake fluid. If you cant find any leaks in the system you might want to look into a new master/slave combo (I always replace both when one goes bad).

 

master/slave combo? which is?

 

---->https://www.rx7club.com/3rd-generation-specific-1993-2002-16/94-fsms-available-download-449950/

 

 

FD3S2005,

Check the link I provided above. There are several causes for the e-brake light to come on and that link talks about almost all of them.

 

alright thanks all