E-Brake Issues on 3rd gen?
#1
Senior Member
Thread Starter
Join Date: Mar 2005
Location: Fairfax, VA
Posts: 447
Likes: 0
Received 0 Likes
on
0 Posts
E-Brake Issues on 3rd gen?
My e-brake light is very sensitive. If I the ebrake is tapped slightly the light will go off. I always had a problem when flooring my car having the light pop up but I would just slam the brake down and it would go away. Resently when I floor the car or give it any hard tap on the gas the hand brake light comes on and just stays. I dont know if its just the light or the ebrake is actually somehow locking. Please help!
#3
~17 MPG
iTrader: (2)
This might sound weird, but top off your brake fluid and see if that fixes your problem:
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/handbrake-light-wot-467458/
-s-
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/handbrake-light-wot-467458/
-s-
#4
Lives on the Forum
Two things can trip the brake light: the brake fluid level sensor in the reservoir of the master cylinder or the contact switch under the e-brake lever. Top up the brake fluid first. If the light is still coming on adjust the switch under the e-brake.
Your e-brake is not locking if the handle is down.
Your e-brake is not locking if the handle is down.
#5
Senior Member
Thread Starter
Join Date: Mar 2005
Location: Fairfax, VA
Posts: 447
Likes: 0
Received 0 Likes
on
0 Posts
Okay sounds good guys, appreciate the feedback as always. I will go thru the first step just gotta get some brake fluidm I will let you know how it goes..
Thread
Thread Starter
Forum
Replies
Last Post