anyone interested? https://www.rx7club.com/forum/showth...hreadid=191383

 

How about some better pic ? hehe

 

What exactly does that do? Help on eliminating wheel hop or what?

 

yes, if you are not aware of its function, it basicly hold the diff in place... no hop, and no broken diffs.... email me at rxrotary2_7@yahoo.com for more pics/info.

 

How about a Tranny Brace/Diff brace combo? I'd be willing to put the money down for both if the quality's right.

 

i can do a trany brace also but did not see a need for it. if you guys want trany brace, i will work on that this week and get some together.

 

.

 

send me the first pic to wonder1and@hotmail.com and I will repost the whole thing for you. + I'd like to see it myself.

 

um yeah i didnt see a price on the link...do you have any installed pics?

 

let me see if this works. [IMG]www.3rdgenrx7.com/keith/brace.jpg[/IMG]

 

DAMN! ok... let me try this... www.3rdgenrx7.com/keith/brace.jpg

 

here is a link to the GB. https://www.rx7club.com/forum/showth...94#post1853594

 

What does the brace bolt to? I know on the diff side it bolts where the PPF is but what does it bolt to on the other side???

STEPHEN

 

to the unibody. other side goes against the PPF on the diff. i will upload a pic i have of an installed one in the morning.

 

 

 

Yeah, Id like to see the Tranny brace too

 

Looks great, how much are you asking for these?

 

you can get them at www.KGParts.com www.rx7store.net www.gothamracing.com

 

So in theory if this were used the stock LSD wouldnt be ripped apart by wheel hop due to the absence of it? Would one still need to upgrade their LSD?

 

I wonder if this will keep my Kaaz from jumping up around corners...?

 

Jumping up around corners?!

That sounds scary....

 

So what does the transmission brace look like?

 

What happens when you bottom out !? Looks like this thing sticks down by an 1" or two... which is 1" too much for me ? Will it damage anything (frame?) that it's bolted to when catching... ??? Or is there something lower that protects it ???

 

it doesnt hang down any lower than the original OEM tunnel brace that this takes the place of. have you ripped that one off?
in all honesty. F%@# the trany brace! that thing causes MAJOR noise that gets to be very annoying. i wont even make one because i dont want to tortue people like that, and i dont want to say it doesnt make noise when it infact does...
i would still replace the torson diff with a clutch type. the TII unit fots right in there.