3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Dash Brake Light Flashing

Thread Tools
 
Search this Thread
 
Old 10-17-07, 07:49 PM
  #1  
(^ _ ^)
Thread Starter
iTrader: (1)
 
YureiRX-7's Avatar
 
Join Date: Mar 2007
Location: Manheim,Pa
Posts: 107
Likes: 0
Received 1 Like on 1 Post
Dash Brake Light Flashing

Tonight I started the car with the clutched still depressed and put it into first to stop the accelerated warm up and then I put it back in neutral and released the clutch pedal and the Brake light started flashing , no pattern just flashing, the brakes are functioning normal and the fluid level is at MAX, I'm guessing this is a clutch issue? I have a Act Street/Strip clutch and I know the release bearing is bad, grinds like hell. Could the bearing cause the light? or something else? Anyone to chime in and help me, I tried searching but I don't know how well.
Old 10-17-07, 08:38 PM
  #2  
Warming the planet.

 
Gadd's Avatar
 
Join Date: Dec 2004
Location: Chico, CA
Posts: 845
Likes: 0
Received 2 Likes on 2 Posts
Most likely a maladjusted E brake switch. Try pushing the E brake handle down with the button depressed. The FSM describes the adjustment.
Old 10-17-07, 08:57 PM
  #3  
(^ _ ^)
Thread Starter
iTrader: (1)
 
YureiRX-7's Avatar
 
Join Date: Mar 2007
Location: Manheim,Pa
Posts: 107
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Gadd
Most likely a maladjusted E brake switch. Try pushing the E brake handle down with the button depressed. The FSM describes the adjustment.
Tried lifting it and puting it down quite a few times, it's definitely not the switch, already adjusted it.
Old 10-17-07, 09:44 PM
  #4  
Rotary Enthusiast

iTrader: (5)
 
AWD-RWD racer's Avatar
 
Join Date: Apr 2006
Location: pennsylvania
Posts: 1,488
Likes: 0
Received 0 Likes on 0 Posts
Fill Up Your Brake Fluid
Old 10-17-07, 09:51 PM
  #5  
(^ _ ^)
Thread Starter
iTrader: (1)
 
YureiRX-7's Avatar
 
Join Date: Mar 2007
Location: Manheim,Pa
Posts: 107
Likes: 0
Received 1 Like on 1 Post
Originally Posted by AWD-RWD racer
Fill Up Your Brake Fluid
Checked before I posted, full and clean
Old 10-17-07, 09:57 PM
  #6  
Warming the planet.

 
Gadd's Avatar
 
Join Date: Dec 2004
Location: Chico, CA
Posts: 845
Likes: 0
Received 2 Likes on 2 Posts
Those are the only two things that turn the brake warning light on. One of the switches may be malfunctioning.

Paul
Old 10-17-07, 10:07 PM
  #7  
(^ _ ^)
Thread Starter
iTrader: (1)
 
YureiRX-7's Avatar
 
Join Date: Mar 2007
Location: Manheim,Pa
Posts: 107
Likes: 0
Received 1 Like on 1 Post
Thanks alot guess I'll re and re adjust and if that doesn't work, meh ha
Old 10-17-07, 10:10 PM
  #8  
Rotary Enthusiast

iTrader: (5)
 
AWD-RWD racer's Avatar
 
Join Date: Apr 2006
Location: pennsylvania
Posts: 1,488
Likes: 0
Received 0 Likes on 0 Posts
good luck...but just for ***** and giggles try adding fluid......mine looked full too and my light still came on....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fastsaab
New Member RX-7 Technical
5
08-19-15 11:42 AM



Quick Reply: Dash Brake Light Flashing



All times are GMT -5. The time now is 02:38 PM.