Dash Brake Light Flashing
 

Tonight I started the car with the clutched still depressed and put it into first to stop the accelerated warm up and then I put it back in neutral and released the clutch pedal and the Brake light started flashing :wallbash: , no pattern just flashing, the brakes are functioning normal and the fluid level is at MAX, I'm guessing this is a clutch issue? I have a Act Street/Strip clutch and I know the release bearing is bad, grinds like hell. Could the bearing cause the light? or something else? Anyone to chime in and help me, I tried searching but I don't know how well.

Most likely a maladjusted E brake switch. Try pushing the E brake handle down with the button depressed. The FSM describes the adjustment.

Tried lifting it and puting it down quite a few times, it's definitely not the switch, already adjusted it.

Fill Up Your Brake Fluid

Checked before I posted, full and clean

Those are the only two things that turn the brake warning light on. One of the switches may be malfunctioning.

Paul

Thanks alot guess I'll re and re adjust and if that doesn't work, meh ha

good luck...but just for shits and giggles try adding fluid......mine looked full too and my light still came on....