crooked willow????
#1
Senior Member
Thread Starter
Join Date: Oct 2002
Location: orange county,ny
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
crooked willow????
does anyone have a contact # for them because i want to buy their dual oil coolers and they don't respond to emails.
another question... does anybody have these on their fd and if so do you like them,and would you recomend them?
thanks,mike
another question... does anybody have these on their fd and if so do you like them,and would you recomend them?
thanks,mike
#4
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
Overkill unless you are running on the track regularly.
I will be posting my review of the Rotary Extreme dual 25-row oil coolers later this week. You might want to see my comments in addition to reading Chris Regan's (CrispyRX7) fine write-up on his site.
http://www.negative-camber.org/crispyrx7/cwrcoolers.htm
I will be posting my review of the Rotary Extreme dual 25-row oil coolers later this week. You might want to see my comments in addition to reading Chris Regan's (CrispyRX7) fine write-up on his site.
http://www.negative-camber.org/crispyrx7/cwrcoolers.htm
#6
www.silverbulletrx7.com
I might be doing a group buy on these in a few months. 10 to 15% off. Not if they are out of business though. If they are it is news to me. Can anybody confirm this?
Last edited by dis1; 06-23-04 at 04:00 PM.
#7
RX-7 Bad Ass
iTrader: (55)
I think Duane's been out of the game for some time.
But, all the CWC stuff was of excellent quality and design.
Dale
But, all the CWC stuff was of excellent quality and design.
Dale
Trending Topics
#8
Super Snuggles
Originally posted by turbojeff
Crooked willow is out of business...
Crooked willow is out of business...
I think both Duane and David have posted here in the not so distant past (I seem to remember a post in the big brake group buy from David), but it's been awhile since I've heard from either one.
#10
Do it right, do it once
iTrader: (30)
Originally posted by jimlab
They ought to take down their web page, then.
I think both Duane and David have posted here in the not so distant past (I seem to remember a post in the big brake group buy from David), but it's been awhile since I've heard from either one.
They ought to take down their web page, then.
I think both Duane and David have posted here in the not so distant past (I seem to remember a post in the big brake group buy from David), but it's been awhile since I've heard from either one.
#11
Super Snuggles
Originally posted by turbojeff
David and Duane were two separate entities. That is an important distinction. Duane (CWR/CWC) was, uh, not timely in delivering product.
David and Duane were two separate entities. That is an important distinction. Duane (CWR/CWC) was, uh, not timely in delivering product.
#16
Rotary Freak
iTrader: (3)
I just recieved my crooked willow oil coolers maybe 2 and a half weeks ago. I still have not installed them cause I have some other issues with my car right now..
Duane: cwc@netwiz.net
Duane: cwc@netwiz.net
#17
Ghost Ride the Whip
But, all the CWC stuff was of excellent quality and design.
Also, if you ever want to get a FMIC, it won't work with this oil cooler kit because of the position the oil cooler thermostat is located.
#18
Senior Member
Thread Starter
Join Date: Oct 2002
Location: orange county,ny
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
hey rynberg i checked out the oil cooler on rotary extreme...very nice but a little more expensive than crooked willow's.( not complaining ) i'm looking to get one soon and if you have some good or bad info on the rotary extreme ones could you please tell me because i may purchase them before your review goes up.
if you want to wait to put up the whole review could you just pm me with some info.
thanks,mike
if you want to wait to put up the whole review could you just pm me with some info.
thanks,mike
#21
Senior Member
Join Date: Aug 2003
Location: Moon Twp. Pennsylvania
Posts: 703
Likes: 0
Received 0 Likes
on
0 Posts
I have the stock r1 dual oil cooler set up for sale if any one is interested. PM me!
$800 complete with all brackets and oil lines. Just bolt on.
Pulled from a 93 R1 with 19k original miles. excellent condition.
$800 complete with all brackets and oil lines. Just bolt on.
Pulled from a 93 R1 with 19k original miles. excellent condition.
#24
Yes it is for sale.
Join Date: Aug 2002
Location: The Houston Club's Resident Lush.
Posts: 1,905
Likes: 0
Received 1 Like
on
1 Post
Interesting,
I have a set of their coolers and helped install a set on a car here in Houston last month. If they went under it was just recently.
Their parts worked great but installing them was tricky at times.
I have a set of their coolers and helped install a set on a car here in Houston last month. If they went under it was just recently.
Their parts worked great but installing them was tricky at times.