RX7Club.com - Mazda RX7 Forum

3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:
Full Detail Automotive

A couple vacuum line questions

Thread Tools
 
Search this Thread
 
Old 07-16-07, 11:16 AM
  #1  
exhaust overheat

Thread Starter
iTrader: (1)
 
windom's Avatar
 
Join Date: Nov 2005
Location: La Crosse, WI
Posts: 558
Likes: 0
Received 1 Like on 1 Post
A couple vacuum line questions
Hello,

I have a couple questions regarding my vacuum system on my non sequential motor. Firstly, I'm having issues hooking my oil injector vacuum lines up. Can anyone point me to where they should connect to? Also, where should the vacuum for my fuel pressure regulator come from?
windom is offline  
Reply Like
Old 07-16-07, 12:02 PM
  #2  
Always Under Construction

iTrader: (9)
 
twomucboost4u's Avatar
 
Join Date: Oct 2005
Location: San Jose
Posts: 2,294
Received 20 Likes on 11 Posts
the oil injectors should go to one of the nipples that come off the front turbos intake pipe. FPR is your using an aftermarket one you can take it off the LIM down by the bottom which points towards the firewall. Hope that hleps.

Chris
twomucboost4u is offline  
Reply Like
Old 07-17-07, 01:58 PM
  #3  
exhaust overheat

Thread Starter
iTrader: (1)
 
windom's Avatar
 
Join Date: Nov 2005
Location: La Crosse, WI
Posts: 558
Likes: 0
Received 1 Like on 1 Post
Originally Posted by twomucboost4u
the oil injectors should go to one of the nipples that come off the front turbos intake pipe. FPR is your using an aftermarket one you can take it off the LIM down by the bottom which points towards the firewall. Hope that hleps.

Chris
I have a stock FPR.
windom is offline  
Reply Like
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Installed UIM gasket, now my engine won't run
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
RX8 13B-REW Swapped. Resonator?
bb6guy
Old School and Other Rotary
10
10-01-18 08:07 AM
700whp+ 13brew gtx4202r
dkwasherexd
Single Turbo RX-7's
21
05-27-17 04:51 AM
Vacuum testing with smoke?
pzr2
General Rotary Tech Support
1
08-15-15 08:29 PM
Resonator for a special case.
bb6guy
3rd Generation Specific (1993-2002)
3
08-12-15 03:29 PM
Back to Subforum
3rd Generation Specific (1993-2002)
View Next Unread
99 tails VS. US tails




Advanced Search
Quick Reply: A couple vacuum line questions


Reply Closed Thread Share

All times are GMT -5. The time now is 05:30 PM.