3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Constant beep at ignition..?

Thread Tools
 
Search this Thread
 
Old 10-01-06, 07:29 PM
  #1  
Full Member

Thread Starter
 
puffxy's Avatar
 
Join Date: Oct 2003
Location: cali
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts
Constant beep at ignition..?

Anyone know what this means? I haven't tried starting the car up yet because i'm slightly afraid of what this beep means..

The sequence of events are as follows:

I put in the key and turn it over to ign., wait for the initial beeps to go through and then sit for probably 10 seconds or so, after which a consistant beep starts from somewhere under the steering colum and just.. stays. just beeps until i pull the key. The only thing i can see is the ABS light is on, i haven't had the car long enough to remember weather that's suppose to stay there til the car is started, or if it goes away after a few seconds like the air bag light..

any help would be appreciated..
Old 10-01-06, 07:34 PM
  #2  
registered user

iTrader: (1)
 
car hugger's Avatar
 
Join Date: Mar 2005
Location: Fort Lauderdale, FL
Posts: 421
Likes: 0
Received 0 Likes on 0 Posts
Is your seat belt buckled? Is your door closed?

I would start the car and see which lights stay or go.

I use to have a 1st gen that had the rev limit buzzer go bad, it would drive me nuts and then I unplugged it.
Old 10-01-06, 08:57 PM
  #3  
Full Member

Thread Starter
 
puffxy's Avatar
 
Join Date: Oct 2003
Location: cali
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts
wierd.. i started the car up and it was the coolant light.. i had just filled it up before i started the car up though, however once the car warmed up the light turned off.. am i missing something?
Old 10-01-06, 09:32 PM
  #4  
Full Member

iTrader: (8)
 
thomascreation's Avatar
 
Join Date: Sep 2006
Location: Illinois
Posts: 187
Likes: 0
Received 0 Likes on 0 Posts
Nope, thats normal. Sometimes the switch will get stuck until it get flow past it again. don't worry.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WyomingTII
2nd Generation Specific (1986-1992)
12
09-28-15 10:32 AM
Linda_Lovelace
General Rotary Tech Support
0
09-18-15 10:04 PM
ChanBagz
2nd Generation Specific (1986-1992)
6
09-17-15 03:36 PM
Blastfastrotary
2nd Generation Specific (1986-1992)
6
09-11-15 12:26 AM



Quick Reply: Constant beep at ignition..?



All times are GMT -5. The time now is 01:55 PM.