Clutch question?
#1
Senior Member
Thread Starter
Join Date: Apr 2002
Location: ???
Posts: 549
Likes: 0
Received 0 Likes
on
0 Posts
Clutch question?
Hello I just purchased a 93 R1 that has been bpu'ed I was wondering what clutch is recommended? I was looking at ACT or rps. Any feedback will be appreciated!
Thanks
Thanks
#3
i got ACT street/strip just a few months ago. i like it. i recommend that you change the flywheel aswell. i got the 9.5 pound indigo flywheel. the throttle is much more responsive now.
#5
Full Member
Join Date: Jul 2001
Location: Dallas, TX
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by redrotaryrock8
i got ACT street/strip just a few months ago. i like it. i recommend that you change the flywheel aswell. i got the 9.5 pound indigo flywheel. the throttle is much more responsive now.
i got ACT street/strip just a few months ago. i like it. i recommend that you change the flywheel aswell. i got the 9.5 pound indigo flywheel. the throttle is much more responsive now.
#6
since we're on the topic of clutches, does your clutch engage contact in the upper half of the pedel depression length??.. I bought my car with a centerforce clutch, and it grabs relatively high
Trending Topics
#8
Full Member
Join Date: Mar 2001
Location: Vancouver, WA
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Pumped
since we're on the topic of clutches, does your clutch engage contact in the upper half of the pedel depression length??.. I bought my car with a centerforce clutch, and it grabs relatively high
since we're on the topic of clutches, does your clutch engage contact in the upper half of the pedel depression length??.. I bought my car with a centerforce clutch, and it grabs relatively high
You can adjust it. I have the Mazdaspeed twin plate clutch and it use to be right at the end of the release. I'm not exactly sure how you do it, but it looked pretty easy. If your in Vancouver, WA, just drop by Corksport in Portland and Derrick will adjust it for you. That was who did mine. Took about 2 minutes. It looked like he loosen some bolt by the clutch release and tighten it at the spot that I want, which is 3/4 of the travel.
Thread
Thread Starter
Forum
Replies
Last Post
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM