My fd was working fine till one day i went to start it after a half hour drive and nothing. i think something is wrong with an ignition wire or a ground wire becuase i replaced the starter, and i still get nothing when i turn the key. No trying to start but not catching or anything, just nothing happens. If anyone has an idea or a map of the ground wires id really appreciate it.

 

OK, when u put the key in the ignition and turn it, do u hear clicking from your glove box area?

 

when i put the key in the alternator clicks when i turn it to the on position but nothing when i try to start it

 

or maybe not the alternator but theres a click

 

did you replace the starter originally because you had this problem?

you have checked the battery at the auto part store to see if it is holding a charge right?

 

Just push start it until you get her going! I have a diagram with some of the ground wires let me see if I can find it for you.

 

did you make sure you installed the starter correctly?

is your battery terminals making good contact?

 

yes i replaced the starter cuz i thought that was the problem because it was corroded inside, and it is installed fine because when i touched the terminals on the cylenoid together, it sparked. Also the battery is holding a charge cuz i stuck a volt meter on it and it read 12.6 but it didnt drop when i turned the key. thats why i think it is a loose wire or something that got knocked loose

 

check the main fuse?

 

not a fuse either, checked those