93BlackFD

So my car just seized up, I have no idea what happened....i was driving down the road, when i hear a clicking noise, so i pushed the clutch in, motor dies

pull over, put in neutral, pushed into a parking spot

150Amp fuse on the battery box in trunk is blown, so we disconnect the battery hookups under the hood, and try to jumpstart the motor with a honda civic w/ jumper cables (civic engine was running)

i was getting 14V solid on the PFC, and when i turn the motor over, it wanted to crank, and putted for a while, but now it won't even turn over

i disconnected all the fan belts, and turned all the pulleys, the main pulley wouldn't turn

which way does it normally turn, counter clockwise or clockwise?

i couldn't turn it like i normally can.....perhaps it has built up compression?

anyone's help will be greatly appreciated....

Street King

I think you can turn ir clockwise but don't qoute me on that. I don't understand how it could have seized unless it was carbon lock up and 3rd gens aren't known for that. You think it could be flooded?

Judge Ito

sounds like an engine bearing is locked with the eccentric shaft..

93BlackFD

yeah, hooked up a breaker bar, it still won't turn over clockwise....

93BlackFD

bump

Redrotor

Even with compression you should be able to turn fairly
easy.

But make sure your clutch and trany is OK.
I have seen spring on disk came off and jamed between
flywheel and starter.

Kiflin

I read the title and thought they government siezed your car.. then I read the first few lines and thought you left it there over night and they siezed it... Im such a moron... lol.

Wish I could help, but I have not a clue what it could be. The information you gave us was rather vague, but I understand where your coming from.

Herblenny

iTrader: (13)

I also thought it was gov. seized...

Anyhow, wow.. i have never hear of this.. I'm getting scared with mine now.. please keep us updated..

D-town R2

Did you see any smoke at any time?

Maybe one of your injectors failed and locked the engine. Pull the plugs and see if they are wet.

Could you have kicked an Apex seal? Damn, no idea.

Good luck.

93BlackFD

yeah, a little bit of smoke when we got it to crank for a bout 5 seconds after it was jump started....was mostly fuel smell

injectors failing and locking the engine?? elaborate

spurvo

This happened to my FC. Broken apex seal locked the front rotor against the "pinch" in the rotor housing. I sold the car for $500.

The engine wouldn't spin at all, no matter HOW hard I tried to move it. Ouch...