schwass

Hey there people ,

I have just been researching mods to do on my car when I rebuild the engine, some will be done whilst the engine is out and some as it gets put back in,

I have been recomende to up grade the intercooler and radiator, what size or dimension would be the best to suit an up grade to a street ported motor with 3mm seals and bnr stage 3 turbos, ???

The inter cooler, radiator, clutch and fly wheel ?? any help would be appreciated, so i can get numerous quotes or pricing so i do not get shafted lol they will be going into a 1999 series 8 fd which is pretty much stock apart from a pfc and commander and k&n element in stock air box, this will get up graded though thanks mark

silverTRD

iTrader: (37)

search.............its at the top right of the 93-02 section. search using koyo, radiator, intercooler, and you will have plenty of info

schwass

sweet thanks dude, had been serching just hadnt found what i was after........ hence my post, cheers

olyrx7

iTrader: (3)

Get the Koyo N-flow series. The best damn radiator as far as I am concerned. I never see temps higher then 90C, and thats under heavy boosting with a Greddy T-88.

schwass

sweet thanks man does it have dimensions ? was it a straight bolt in or do you have to mount new brakets? thanks

olyrx7

iTrader: (3)

Here is my setup:http://i37.photobucket.com/albums/e9...7/f8165424.jpg

But this rad will fit in the stock location, but you may need to do some minor modifications for a perfect fit.

rexset

My recomendation is that you but the intercooler type III at www.petittracing.com and the ratiadator at http://www.radiatorworld.com just chooose the big one.

schwass

hey guys thanks very much for the info the www.petittracing.com link i couldnt get to work, can anyone tell me if the url is spelt correctly? and just wondering if anyone can tell me what sort of clutch and sort of flywheel and weight Would be best thanks again mark

rexset

Sorry it is www.pettitracing.com
You can find a fine cluth at www.mazdatrix.com , the reciently develope a new disck that works great for mod cars ( http://www.mazdatrix.com/getprice.asp?partnum=12508) , on case I recomend to use it with a ACT pressure plate.

For the flywheels , you can finde in the Pettit Racing web page too, you can call Cameron who is the owner and ask him about the flywheel cause it like asking what color do you like best.

schwass

sweet as thanks heaps dude, much appreciated have a good day