3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

a/c removal and question about greddy elbow

Thread Tools
 
Search this Thread
 
Old 05-22-07, 03:21 AM
  #26  
Senior Member

Thread Starter
iTrader: (1)
 
RX7Crazy_84's Avatar
 
Join Date: May 2004
Location: vancouver BC
Posts: 598
Likes: 0
Received 0 Likes on 0 Posts
ya ur right, thanks for the heads up! i am worried about that as well!
Old 05-22-07, 10:45 AM
  #27  
Lives on the Forum

 
rynberg's Avatar
 
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes on 8 Posts
Originally Posted by RX7Crazy_84
ya i dont have undertray on my car! ya i am going to do that! oh ya and another quesiton when i took off the uim i smelled fuel fumes! but other then that i neva do and wen i looked for leaks around injectors no smell their wats ever! but around tb their was! so this normal?
1. Get an undertray.
2. NO, it is NOT normal. Find the fuel leak and fix it before you car goes up in flames.
Old 05-22-07, 11:21 AM
  #28  
Senior Member

Thread Starter
iTrader: (1)
 
RX7Crazy_84's Avatar
 
Join Date: May 2004
Location: vancouver BC
Posts: 598
Likes: 0
Received 0 Likes on 0 Posts
yes i got an undertray though! i will take it the shop for the fuel related stuff! but it didnt seem to smell anywhere near the railings! only smelt it wen i took off the uim cud smell sum fumes in tb
Old 05-22-07, 11:27 AM
  #29  
Senior Member

Thread Starter
iTrader: (1)
 
RX7Crazy_84's Avatar
 
Join Date: May 2004
Location: vancouver BC
Posts: 598
Likes: 0
Received 0 Likes on 0 Posts
where shud start from to look for the fuel leak? i know my orings were changed on the injectors!
Old 05-22-07, 04:26 PM
  #30  
What's your point ?

 
CantGoStraight's Avatar
 
Join Date: Feb 2001
Location: Gainesville, Fla.
Posts: 3,573
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by RX7Crazy_84
where shud start from to look for the fuel leak? i know my orings were changed on the injectors!
Fuel pulsation damper, fuel lines, cracked injectors ? The TB doesn't have anything to do with fuel so there must be fuel leaking from an injector.
Old 05-22-07, 05:19 PM
  #31  
Senior Member

Thread Starter
iTrader: (1)
 
RX7Crazy_84's Avatar
 
Join Date: May 2004
Location: vancouver BC
Posts: 598
Likes: 0
Received 0 Likes on 0 Posts
umm i ll take a look at that! how do i know if fuel pulsation damper is bad?
Old 05-22-07, 09:42 PM
  #32  
What's your point ?

 
CantGoStraight's Avatar
 
Join Date: Feb 2001
Location: Gainesville, Fla.
Posts: 3,573
Likes: 0
Received 0 Likes on 0 Posts
How many miles on the car ? How long have you had it, was it changed before you bought it ? If you don't know the answer to any of these question then you need to change it, if you would rather test it there's a rubber tit that sticks out of it, if you touch it and it falls off it's bad, if you give it a slight tug and it falls off it's bad, if the **** missing it's bad, if the tit's missing, and you touch it and it feels moist, it's bad.
Old 05-23-07, 02:54 PM
  #33  
Senior Member

Thread Starter
iTrader: (1)
 
RX7Crazy_84's Avatar
 
Join Date: May 2004
Location: vancouver BC
Posts: 598
Likes: 0
Received 0 Likes on 0 Posts
the car 163000km and the engine has 24000, injectors o rings was changed last yr that cured all of the problem didnt smell any gas fumes how i did b4 wen i would get out of my car after driving! so till upto now i never smelled anything untill i took off the uim and that was just for like 3 to 5 seconds!k ill find the fuel pulastion damper and do what u tld me to!
Old 06-01-07, 12:18 AM
  #34  
Senior Member

Thread Starter
iTrader: (1)
 
RX7Crazy_84's Avatar
 
Join Date: May 2004
Location: vancouver BC
Posts: 598
Likes: 0
Received 0 Likes on 0 Posts
so everything is finally done took the car for good spin!! soo far soo good i ll drive it around again tommrow!! but now i have boost leak and its not pullin as hard! but i know where its comin from!! the bottom stock intercooler pipe is leakin!! and i took the aws pipe off my car as well but didnt make anything to plug the hole on the elbw! but once i get those fixed!! i ll let u guys know how it goes!! but thank you soo much for your help guyz cudnt have done it without it!!
Old 06-01-07, 03:32 AM
  #35  
PV = nRT

 
clayne's Avatar
 
Join Date: Jan 2003
Location: New Zealand (was California)
Posts: 2,250
Likes: 0
Received 0 Likes on 0 Posts
So did you find the fuel leak? Because if you didn't, it's going to find you.
Old 06-01-07, 11:48 AM
  #36  
Senior Member

Thread Starter
iTrader: (1)
 
RX7Crazy_84's Avatar
 
Join Date: May 2004
Location: vancouver BC
Posts: 598
Likes: 0
Received 0 Likes on 0 Posts
thas finee! i checked everything is good!
Old 06-01-07, 11:55 AM
  #37  
Lives on the Forum

 
rynberg's Avatar
 
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes on 8 Posts
Originally Posted by RX7Crazy_84
....but now i have boost leak and its not pullin as hard!...i took the aws pipe off my car as well but didnt make anything to plug the hole on the elbw!
If you removed the AWS line without plugging it, all of your boost will shoot out the opening in the elbow!
Old 06-01-07, 12:04 PM
  #38  
Senior Member

Thread Starter
iTrader: (1)
 
RX7Crazy_84's Avatar
 
Join Date: May 2004
Location: vancouver BC
Posts: 598
Likes: 0
Received 0 Likes on 0 Posts
i made the blck off plate under the uim just the elbow is left ya i will plug it and see how it goes! i did last nite lol! oh ya and car is running much better cooling wise did the fcthermoswitch as well the fans come on rite at 95 c! i was curious about one thing if ur temps r like 100 c rite do the fans stay on till the drop below 95 celus
Old 06-01-07, 03:25 PM
  #39  
Lives on the Forum

 
rynberg's Avatar
 
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes on 8 Posts
Well, yeah, you have to plug both holes.....kind of pointless just plugging one. Yes, if you are above 95C, the fans would stay on until the water temp hit 92-94C, depending on how the switch is set up.
Old 06-01-07, 03:54 PM
  #40  
Senior Member

Thread Starter
iTrader: (1)
 
RX7Crazy_84's Avatar
 
Join Date: May 2004
Location: vancouver BC
Posts: 598
Likes: 0
Received 0 Likes on 0 Posts
yeah i know ill plug the elbow hole tommrow! oh i see well its just normal fctheromswitch so it just goes on at 95c
Old 06-01-07, 05:35 PM
  #41  
Searching for 10th's

iTrader: (11)
 
jkstill's Avatar
 
Join Date: May 2002
Location: Portland OR
Posts: 2,247
Received 29 Likes on 18 Posts
Originally Posted by RX7Crazy_84
yeah i know ill plug the elbow hole tommrow! oh i see well its just normal fctheromswitch so it just goes on at 95c
Just an FYI: the period "." is located right between the "<" and the "?" on most keyboards.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM
Snoopy FD
Build Threads
25
12-08-15 01:45 PM



Quick Reply: a/c removal and question about greddy elbow



All times are GMT -5. The time now is 04:49 PM.