any common fd power window faults?
06-01-07, 05:12 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2006
Location: on the track
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
any common fd power window faults?
just trying to help a friend with the power windows on his 96 fd, fuses are ok and power is at the fuse but no power at either switch, suspect a broken wire etc. or a connecter between the fuse and switchs somewhere has a bad connection, any help appreciated
06-01-07, 05:41 PM
#2
Rotary Enthusiast
Join Date: Apr 2006
Location: Grovetown, Ga
Posts: 849
Likes: 0
Received 0 Likes
on
0 Posts
a lot of people have issues with the switches themselves. the contact plate inside the switch gets dirty. if this is the case for you, *CAREFULLY* take the switch apart and clean the contact plate.
06-01-07, 05:52 PM
#3
Junior Member
Join Date: Feb 2007
Location: Nashville
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
I had this same problem in my 94 FD recently. Power to the fuse box. good fuses. the switches functioned if I put power strait to them and since the passenger door runs through the drivers door switch they both failed. I found the short in the rubber hose that connects the drivers door to the dash. All I had to do was pull back the hosing and patch it.
