Boost problems. What do you think?
Thread Starter
Senior Member
Joined: Mar 2001
Posts: 554
Likes: 0
From: Norcross,Ga,USA
Boost problems. What do you think?
After doing the hose job I am getting no boost. Under load she just sputters like she's out of gas and starts to back fire. So I took everything off again and under the ignition coils ubove the rotorhousing I found a nut just sitting there. I wonder if that nut could be just shorting out the electrical systom when I'm under load? What are the chances that this nut could be the culpret?
Full Member
Joined: Feb 2001
Posts: 172
Likes: 0
From: woodstock,Ga
Hey Efini,
I think your vac hose is too thin walled.
I would look at going with some 1/8" wall thickness or 3.5 mm. Bring back that double throttle solenoid, and get some pills for the turbos. I think you will see a difference.
Scott
I think your vac hose is too thin walled.
I would look at going with some 1/8" wall thickness or 3.5 mm. Bring back that double throttle solenoid, and get some pills for the turbos. I think you will see a difference.
Scott
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
Jul 17, 2019 02:20 PM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
erevos
2nd Generation Specific (1986-1992)
4
Sep 15, 2015 09:19 AM