Boost prob..lend me your knowledge please..
02-09-02, 03:46 AM
#1
Senior Member
Thread Starter
iTrader: (4)
Join Date: Jul 2001
Location: Colorado Springs, CO
Posts: 478
Likes: 0
Received 0 Likes
on
0 Posts
Boost prob..lend me your knowledge please..
hey everyone ok check this out what do u think will cause this
i accelerate in first gear.......hit 10 psi steady once 4000 rpm kicks in drops slowly to 5psi and will not boost higher that 5psi unless i shift to different gear? its like if the 2nd turbo isnt kickin in right??
also i have mods that are a no no for a stock ecu i have downpipe high flo cat my boost creeps up to 13-14psi sometimes i heard i can get a restrictor plate does that actually help out, if so where ya get those suckers from???
THANKS AGAIN!
i accelerate in first gear.......hit 10 psi steady once 4000 rpm kicks in drops slowly to 5psi and will not boost higher that 5psi unless i shift to different gear? its like if the 2nd turbo isnt kickin in right??
also i have mods that are a no no for a stock ecu i have downpipe high flo cat my boost creeps up to 13-14psi sometimes i heard i can get a restrictor plate does that actually help out, if so where ya get those suckers from???
THANKS AGAIN!
02-09-02, 10:06 AM
#2
IRS 4 Life
iTrader: (12)
Join Date: Feb 2001
Location: Sicklerville, South Jersey!!
Posts: 2,634
Likes: 0
Received 2 Likes
on
2 Posts
dont know abt the boost pattern....dose it only happen in 1st gear?
14psi..i hope yove been saving for your new motor...
so your only mods are high flow and dp?
sorry i couldnt be more help, sounds like a sticking solonid..wierd it would only happen in first gear
14psi..i hope yove been saving for your new motor...
so your only mods are high flow and dp?
sorry i couldnt be more help, sounds like a sticking solonid..wierd it would only happen in first gear
02-09-02, 10:53 PM
#3
Senior Member
Thread Starter
iTrader: (4)
Join Date: Jul 2001
Location: Colorado Springs, CO
Posts: 478
Likes: 0
Received 0 Likes
on
0 Posts
......
yeah yeah i know its lean but i dont push my car i never let it go past 10 psi....i keep my eyes on the boost gauge dont go by the speedo once it hits 10psi i let off......so i should be fine i am gettin ecu after i see results of people runnin AEM if they suck i will buy a PFC or Haltech untill then i go slow..... but the boost problem is actuall in 1st 2nd and 3rd gear...4th and 5th i really dont push it thats when ive seen it creap( only creaped on my 3 times).....
but the boost problem is actuall in 1st 2nd and 3rd gear...4th and 5th i really dont push it thats when ive seen it creap( only creaped on my 3 times).....
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM