boost leak, no boost ..help please
Thread Starter
Full Member
Joined: Feb 2001
Posts: 175
Likes: 0
From: Bethpage, NY, USA
boost leak, no boost ..help please
whats up guys
Recently i have discovered the car isn;t boosting above .3 bar .i pretty much have a pettit ECU, dp/highflow/cb. The car is running good and the 2nd turbo is coming on as well..But i'm getting like a .3 bar max. The last thing i did was the pettit intake and this happened shortly after i installed the intake. The car is running strong for .3 bar but im not seeing more boost than that...i checked the boost gauge to make sure it working right (but i can feel a difference btwn 4 and 12psi that i should be running at. I can feel and also hear air leaking from a hose or someting. I checked the main IC hoses, intake hoses, Y-pipe...
any suggestions..how shall i proceed.
Thanks for any help u can provide.
Recently i have discovered the car isn;t boosting above .3 bar .i pretty much have a pettit ECU, dp/highflow/cb. The car is running good and the 2nd turbo is coming on as well..But i'm getting like a .3 bar max. The last thing i did was the pettit intake and this happened shortly after i installed the intake. The car is running strong for .3 bar but im not seeing more boost than that...i checked the boost gauge to make sure it working right (but i can feel a difference btwn 4 and 12psi that i should be running at. I can feel and also hear air leaking from a hose or someting. I checked the main IC hoses, intake hoses, Y-pipe...
any suggestions..how shall i proceed.
Thanks for any help u can provide.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZaqAtaq
New Member RX-7 Technical
2
Sep 5, 2015 08:57 PM
AXA
Single Turbo RX-7's
8
Sep 5, 2015 10:06 AM
gabescanlon
3rd Generation Specific (1993-2002)
4
Sep 5, 2015 12:04 AM




