Best fitting high flow midpipe?
#1
Best fitting high flow midpipe?
Can anyone chime in with the best fitting high flow cat? I don't care about the quality of the cat, what's more important is the fitment along with the alignment to the down pipe and catback (also noting that the metal rod should fit appropriately into the rubber hanger). I am talking with a manufacturer in Japan for a limited run of 90mm titanium high flow cat mid pipes and want to supply him with the best design. I have a couple brands in mind however your input is truly appreciated.
Trending Topics
#8
Full Member
iTrader: (1)
My vote goes to the Bonez - it fits into the hanger properly, the angles and locations of the flanges line up with the stock unit, and the air pump connection works without any fuss.
It replaced a unit with not so great fitment on my car so that made me appreciate its quality a bit more.
It replaced a unit with not so great fitment on my car so that made me appreciate its quality a bit more.
#9
RX-7 Bad Ass
iTrader: (55)
Really, pretty much anything that isn't an Ebay cheapie will fit well. I've had countless exhaust systems and variations on my car and everything lined up and fit properly save the Ebay midpipe I had.
Dale
Dale
#10
bow leggin'
iTrader: (25)
IMO the Rx7store midpipe is not a great option. I had fitment issues with mine and after a few track days the muffler packing was completely gone, effectively defeating its intended purpose. The magnaflow muffler does not hold up to the exhaust temperature of a rotary well. I'll be hopefully repacking my magnaflow in the near future with a better material.
#13
needs more track time
iTrader: (16)
I've tried various over the last 10 years. Best fitting high flow cat is the Bonez from RX7.com. Places the cat right where it should be w/o hitting anything.
Rotary Performance | FD Exhaust
Rotary Performance | FD Exhaust
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM