Arghhh.....!!!!!1
#1
Rotary Enthusiast
Thread Starter
Arghhh.....!!!!!1
pls have sympothy!! argh. Well, I was doing the vacuum line job and of course SNAP goes a lil solenoid, and I didnt want to take out the solenoid rack, because the screws felt like they would strip so easily, and I didnt want to take out the alternator and all that **** fearing my engine would never ever run again, now its snapped. YAY if anyone has a charge control solenoid, pls pm me =\ my day just went completely downhill.
****.
****.
#2
Hamado things my way!
Join Date: Oct 2001
Location: Pensacola, Florida
Posts: 1,245
Likes: 0
Received 0 Likes
on
0 Posts
Don't fret it man. Just eliminate the fuel pressure regulator solenoid, and use that solenoid for the CC. Also, take off your alternator and the solenoid rack. It's not that hard. Even if the nuts strip, you can just take a screwdriver and a hammer and tap them loose. Take your time, be patient, and be calm. If you are getting mad, then go inside, get a drink, leave it alone till you calm down. Once you come back with a clear head, it will be as easy as pie.
#3
that was some of the best advice I have heard in a while p'cola. It so true, if you try to accomplish something while your angry it will never work. Just take a little break and figure out what you need to do. Then sip a drink and take it on full go. Before you know it, you will be tightening down the last bolt with a look of satisfaction on your face.
#4
Rotary Enthusiast
Thread Starter
so you have to take off your alternator to get the solenoid rack out? also, it wont cause any harm to not have the fuel pressure regulator solenoid on there??????????????? shouldnt I just get ahld of another CC solenoid.?
Steve
Steve