02Sidewinder

Is there anything (rubber pads etc.) that goes between the R1 spoiler and the hatch?

DaleClark

iTrader: (55)

Don't believe so - I think it just sits right on the paint. I've seen pics of spoilers that have been removed and you can see the rub spots from the spoiler on the paint.

Considering it's supposed to be a permanent addition, it's acceptable .

Dale

David Beale

There are sticky pads that are supposed to seal the bolt holes. They look like industrial double sided tape (not the foam type). I didn't have them and used silicone rubber (clear) and it worked fine. You need something or you will get water pooling inside the hatch and running out when you open it.

rzograbian

uhhh..... i just re-painted my complete car and there was no such thing... check my website!

turbojeff

iTrader: (30)

Uhh...

I just bought two complete sets of the factory seals for the R1 spoiler....

Check mate.

93BlackFD

yeah, they have seals

Sled Driver

iTrader: (9)

Page 3-E11 of the parts catalog

51-965D (p/n FD03-51-9G8)
51-966B (p/n FD03-51-9G9)

are listed as GASKET (C), SPOILER

So, the correct answer to your question is............

Yes

turbojeff

iTrader: (30)

I think there should be 4 different part numbers, 2 different seals per side then the L and R. They are mirror image.

Rotarius

Mine had some black spongy pads that I guess after time got pressed and crush so the spoiler rubbed against the hatch.

rzograbian

haha.... that would explain the water in my trunk!