Anyone know the JDM passenger side door actuator part number??
#4
Senior Member
iTrader: (1)
Join Date: Oct 2001
Location: South Carolina
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
I would like to know as well. Or if someone has it for sale used that would be nice email me at hydouken@hiptop.suncom.net
#5
sdrawkcab
iTrader: (1)
I have been looking for one also. Maybe there is enough interest in these to get a GB going, because I have read on here many times people looking for them.
I know there are fairly easy ways to mount a generic solenoid, but I really want one that was designed for the door and will have no issues and run reliably for years to come.
I know there are fairly easy ways to mount a generic solenoid, but I really want one that was designed for the door and will have no issues and run reliably for years to come.
#6
***Moderator***
Thread Starter
Join Date: Feb 2001
Location: Chicago
Posts: 2,413
Likes: 0
Received 0 Likes
on
0 Posts
I can start a group buy as soon as i can find the number. I have ppl get me the part, just need to get the number to him, so it will be much easier for him to find the right thing.
#7
RX-7 Bad Ass
iTrader: (55)
I've been desperately trying to find one for a few months now. I actually got the power door lock actuator from a JDM car - just the motor itself. I found out that it WILL NOT work on the USDM driver's side door latch - it looks like it would work, but you'd have to remove part of the bracket for the door latch that's critical to the operation of the latch. In other words, you'd need the whole latch assembly.
The thing that's killing me is there has to be TONS of used JDM passenger door latches with ZERO value in Japan. There HAS to be a way to get someone to hit up some junkyards, rotary shops, SOMETHING. It's not that hard to pull the assembly out of the door either - if you know what you're doing, it's 15-20 minutes tops.
I'll look around - I think someone listed a part number at one point.
Dale
The thing that's killing me is there has to be TONS of used JDM passenger door latches with ZERO value in Japan. There HAS to be a way to get someone to hit up some junkyards, rotary shops, SOMETHING. It's not that hard to pull the assembly out of the door either - if you know what you're doing, it's 15-20 minutes tops.
I'll look around - I think someone listed a part number at one point.
Dale
Trending Topics
#9
RX-7 Bad Ass
iTrader: (55)
Booyah - check this thread out:
https://www.rx7club.com/showthread.p...jdm+power+lock
And in particular:
See what you can do with that, Neo!
Dale
https://www.rx7club.com/showthread.p...jdm+power+lock
And in particular:
You can buy the door lock complete with the solenoid directly from Japan, mazda part number F123-58-310C at about USD100. This is for RHD vehicle though. You can order from www.perfectrun.com.au or www.japanparts.com
Dale
#10
RX-7 Bad Ass
iTrader: (55)
Originally Posted by nashman69g
I also wonder if it needs its own relay box or if the drivers side one is enough or what?...I haven't looked at the wiring so I don't know!
Dale
#11
***Moderator***
Thread Starter
Join Date: Feb 2001
Location: Chicago
Posts: 2,413
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DaleClark
Booyah - check this thread out:
https://www.rx7club.com/showthread.p...jdm+power+lock
And in particular:
See what you can do with that, Neo!
Dale
https://www.rx7club.com/showthread.p...jdm+power+lock
And in particular:
See what you can do with that, Neo!
Dale
#12
RX-7 Bad Ass
iTrader: (55)
Awesome - keep me posted! I ended up hacking my USDM door latch in an attempt to get the JDM lock motor to work....long story short I have no power locks and the security system acts weird now . I'm holding off on a short-term fix for the long-term plan - keyless entry!
Thanks!
Dale
Thanks!
Dale
#13
sdrawkcab
iTrader: (1)
Originally Posted by DaleClark
keyless entry!
I know CF some like it some don’t, if used sparingly it can look good IMO. And in this scenario I don’t know how I could shave the columns and mask it any better than this without extensive effort. Yes I do have a secondary entry strategy in place.
Count me in if it is OK for me to ride your guys wave
I know of no one other than Jason and now he is gone
#16
RX-7 Bad Ass
iTrader: (55)
Probably just need to change the letter on the end of the part number and that should be the other side - I know that's how the door handles are done. I believe the door handles are A-D, with 2 letters being USDM left/right and 2 letters being JDM left/right.
I would try "D".
Dale
I would try "D".
Dale
#18
What's your point ?
Join Date: Feb 2001
Location: Gainesville, Fla.
Posts: 3,573
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by HYDOUKEN
I would like to know as well. Or if someone has it for sale used that would be nice email me at hydouken@hiptop.suncom.net
This is what I used on my car for keyless entry without fear of damaging the door mechanicals.
#19
***Moderator***
Thread Starter
Join Date: Feb 2001
Location: Chicago
Posts: 2,413
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CantGoStraight
I can get them for $125 shipped + paypal fee. Jack
This is what I used on my car for keyless entry without fear of damaging the door mechanicals.
This is what I used on my car for keyless entry without fear of damaging the door mechanicals.
#20
What's your point ?
Join Date: Feb 2001
Location: Gainesville, Fla.
Posts: 3,573
Likes: 0
Received 0 Likes
on
0 Posts
Go ahead it'll save me money ! ! !
Originally Posted by neo_omega
give us the PN, or I will ban your account
#21
sdrawkcab
iTrader: (1)
Originally Posted by CantGoStraight
Go ahead it'll save me money ! ! !
I have the feeling I would have a new user name and IP address within the hour if banned though
Hey cantgostraight, thanks for any help you can supply in finding the necessary parts for this modification.
#22
What's your point ?
Join Date: Feb 2001
Location: Gainesville, Fla.
Posts: 3,573
Likes: 0
Received 0 Likes
on
0 Posts
Several people on here have done this mod. You can buy cheaper door lock actuators all day long but they just don't seem to have the capability to not destroy the mechanics of the door locks and opening mechanisim. Will keep you guys posted ? ? ?
#23
What's your point ?
Join Date: Feb 2001
Location: Gainesville, Fla.
Posts: 3,573
Likes: 0
Received 0 Likes
on
0 Posts
Located two of these. Dale has got his on the way. Anyone else needs to contact me ASAP as the supplier will be gone on vacation Leaving tomorrow. He may or may not be able to get it out before he leaves. Jack
#24
RX-7 Bad Ass
iTrader: (55)
I'll be documenting the installation of this sucker as well - I'm going for a pretty slick install. Still gotta find a keyless entry system that I'm happy with .
Dale
Dale