Anyone Know How To Take Off The Door Panel....
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Mar 2002
Location: San Jose
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Anyone Know How To Take Off The Door Panel....
From the Passanger Side??
I need to take off the door panel in order to bypass the speaker amp.
Thanks For Help in advance.
I need to take off the door panel in order to bypass the speaker amp.
Thanks For Help in advance.
#2
Senior Member
there is a removable clip in the middle of the padded area of the door, and then a couple of screws on the area by the rear of the area where the door jamb locks into the door. i think. then you need to take apart the base of the handle. the piece at the bottom pops out...then there is a screw in there. it has been a while since i did mine, but they are really not that hard.....
#3
Originally posted by R Xplicit
there is a removable clip in the middle of the padded area of the door, and then a couple of screws on the area by the rear of the area where the door jamb locks into the door. i think. then you need to take apart the base of the handle. the piece at the bottom pops out...then there is a screw in there. it has been a while since i did mine, but they are really not that hard.....
there is a removable clip in the middle of the padded area of the door, and then a couple of screws on the area by the rear of the area where the door jamb locks into the door. i think. then you need to take apart the base of the handle. the piece at the bottom pops out...then there is a screw in there. it has been a while since i did mine, but they are really not that hard.....
#4
Full Member
Thread Starter
iTrader: (1)
Join Date: Mar 2002
Location: San Jose
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
i took out the screws around the door. i think they were 3 of them
then i took the screw that is by the handle and the screw that is covered by a button at near the bottom middle.
hehe i hope this makes sense.
the whole door panel is loose except the part where u put your hand around for the powered window.
that part is like stuck.
Help?
then i took the screw that is by the handle and the screw that is covered by a button at near the bottom middle.
hehe i hope this makes sense.
the whole door panel is loose except the part where u put your hand around for the powered window.
that part is like stuck.
Help?
#7
Senior Member
Join Date: Mar 2002
Location: bay area
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
do a search on "remove AND door" , you should be able to find the answer from there. I just did it 2 days ago, it was pretty easy except you gotta be careful when you remove the panel after all the screws are out. Pull the bottom out first and then lift the top straight up.
Trending Topics
#8
Mr. Links
iTrader: (1)
Originally posted by EvanchiX
i took out the screws around the door. i think they were 3 of them
then i took the screw that is by the handle and the screw that is covered by a button at near the bottom middle.
hehe i hope this makes sense.
the whole door panel is loose except the part where u put your hand around for the powered window.
that part is like stuck.
Help?
i took out the screws around the door. i think they were 3 of them
then i took the screw that is by the handle and the screw that is covered by a button at near the bottom middle.
hehe i hope this makes sense.
the whole door panel is loose except the part where u put your hand around for the powered window.
that part is like stuck.
Help?
You need to take a screw driver and pop the window control unit out (it just snaps in). Then pull it all the way out until you can disconnect the wires.
Inside where the window control was, you'll see the last screw that you need to remove.
It's a pain the first time.
#9
Originally posted by Mahjik
As stated, you can search, but I'll help you out because it was a pain for me to find that last screw as well.
You need to take a screw driver and pop the window control unit out (it just snaps in). Then pull it all the way out until you can disconnect the wires.
Inside where the window control was, you'll see the last screw that you need to remove.
It's a pain the first time.
As stated, you can search, but I'll help you out because it was a pain for me to find that last screw as well.
You need to take a screw driver and pop the window control unit out (it just snaps in). Then pull it all the way out until you can disconnect the wires.
Inside where the window control was, you'll see the last screw that you need to remove.
It's a pain the first time.
Thread
Thread Starter
Forum
Replies
Last Post